Revision of the genus Attaphila (Blattodea: Blaberoidea), myrmecophiles living in the mushroom gardens of leaf- cutting ants

The genus Attaphila, comprising minute myrmecophilous cockroaches, is revised, including now six previously known (A. aptera, A. bergi, A. flava, A. fungicola, A. schuppi, A. sexdentis) and three new species (A. multisetosa sp. nov. Bohn and Klass, A. paucisetosa sp. nov. Bohn and Klass, A. sinuosocarinata sp. nov. Bohn and Klass). All species are described or redescribed and depicted with their main characteristics; determination keys allow the identification of males and females. Especially the male characters allow a distribution to two species-groups with differing host specificity: bergi-group associated with Acromyrmex (and possibly Amoimyrmex) ants, fungicola-group associated with Atta ants; the former appears paraphyletic, the latter monophyletic. The genus Attaphila is characterised emphasising its unique features: (1) insertion of antennae at the bottom of a wide funnel-shaped deepening; (2) antenna with the possibility of a rectangular bending between scapus and pedicellus (associated with a distal excavation of the scapus) and (3) with an unusual shape and low number of antennomeres; (4) femora of legs with a ventral groove allowing a close spacing of femur and tibia during a strong flexion; (5) a complex and unusual shape of the laterosternal shelf area of the female genitalia (lack of shelf, presence of a pair of complicated tubular invaginations); and (6) lateral parts of abdominal tergite T9 of male ending in a pair of ventromesally directed arms, which contact the lateral margins of the subgenital plate. Functional aspects and the possible biological roles of these features are discussed. Older biological data are summarised and new observations are presented. The position of Attaphila within Blattodea is discussed. Like a recent molecular study, the morphology of the male genitalia places the genus in the Blaberoidea. The molecular result of Attaphila being closest to three particular blattellid genera, however, is conflictual from the morphological perspective.


Introduction
The species of the cockroach genus Attaphila are myrmecophiles living in the mushroom gardens of leaf-cutting ants of the genera Atta, Acromyrmex, and Amoimyrmex (all Formicidae: Myrmicinae: Attini and forming a monophyletic group: Cristiano et al. 2020). With their body length of 2.5-3.5 mm, Attaphila specimens are among the smallest cockroaches. The first species, Attaphila fungicola, was formally described from Texas (Wheeler 1900). Within the following five years four further species from various countries in South America were described by Bolívar (1901Bolívar ( , 1905: A. aptera from Colombia, A. bergi from Argentina and Uruguay, as well as A. sexdentis and A. schuppi from Brazil. It took more than 30 years till the sixth and hitherto last species was described: A. flava from Honduras by Gurney (1937). Due to their hidden life in ant nests Attaphila species are rarely collected and recorded, although they are apparently quite often seen by researchers working on the ant hosts. There are only few further reports apart from the descriptions listed above and these only concern part of the species. A. aptera was, according to Bruijning (1959), also found in Surinam. Bruch (1916Bruch ( , 1929 added some new localities for A. bergi in Argentina and described a new variety (var. minor) of it. A. fungicola was reported from Texas (Hebard 1916), Panama and Guyana (as British Guiana) (Wheeler 1928), and Trinidad (Brossut 1976).
Recent excavations of nests of leaf-cutting ants in Panama (near Gamboa) by one of us (V.N.) revealed that a large number of the nests were inhabited by Attaphila specimens. This allowed investigations of the chemical factors involved in the communication between ants and their cockroach "guests" (Nehring et al. 2016). Unfortunately, a determination of these Attaphila specimens to species-level was not possible, since none of the hitherto existing descriptions contains characterisations allowing a distinction of the various species.
In order to get the desired information for the determination it was necessary to study the type specimens of the described species, most of which were deposited in the Maastricht Museum (NHME). Having all available types at disposal offered the possibility for an urgently needed revision of the genus including a study of male and female genitalia. For this purpose, numerous museums of North, Central and South America and research groups working on leaf-cutting ants were asked for additional material. The result was disappointing and did not significantly improve the highly unsatisfying situation concerning the material available for the revision. Regarding the previously described species, the types of A. bergi and of its variety var. minor are lost; and the sole type specimen of A. aptera turned out to be a juvenile lacking almost all species-specific characters necessary for an unequivocal identification. Under inclusion of the species newly described herein, for three of the species only a single adult specimen was available, and less than half of the species were represented by both sexes. Despite this situation, we consider a taxonomic revision of Attaphila at the present as appropriate, since the status of its systematics is highly confused, the genus is of great interest for ecological work, and our sample most likely includes most (if not all) of the specimens currently available worldwide. Princis (1963: pp. 76, 110) placed Attaphila in a separate family (Attaphilidae) in the "subordo" Poly pha goidea (now considered as a family, Corydiidae : Beccaloni 2014). This, however, was based neither on reasoning in accord with phylogenetic systematics nor on consideration of the morphology of the male genitalia, which are the key character system for morphology-based phylogenetic studies in Blattodea (see Grandcolas 1996;Klass 1997Klass , 2001Klass and Meier 2006;Djernaes et al. 2015). Roth (1968Roth ( , 2003 assigned Attaphila to the family Blattellidae (= Ectobiidae if both names are used in their wider sense; see Beccaloni 2014), classifying it as a monogeneric subfamily (Attaphilinae) of this taxon. Roth's considerations were based on his own observations concerning the structure of ovarioles and on still unpublished drawings of male and female genitalia of A. fungicola and A. bergi made by F. A. McKittrick, which were available to L. Roth. Attaphila has not been included in any of the major published morphology-based contributions on the phylogeny of Blattodea (McKittrick 1964;Klass 1997Klass , 1998Klass and Meier 2006), and morphological data on the genus (see Brossut 1976) are overall very limited. However, the genus has recently been included in Djernaes et al.'s (2020) molecular-based study of cockroach phylogeny (focused on the well-established cockroach clade Blaberoidea), where it was placed deeply subordinate in Ectobiidae-Blattellinae 1 , as the sister-taxon of a Xesto blatta species (this genus appearing as polyphyletic). In the present revision, we thus also discuss whether or not previously published and newly acquired morphological data agree with this hypothesis on the phylogenetic position of Attaphila. The evidence from this will be fragmentary due to the very limited morphological treatment of the Blaberoidea.
of Blaberoidea into the five families Pseudophyllodromiidae, Blattellidae, Ectobiidae, Nyctiboridae, and Blaberidae (i.e. we treat the four former subfamilies that together formed the family Ectobiidae in its older, wider sense as families); and we follow Djernaes et al. (2020) regarding the formal assignment of Attaphila to Blattellidae. This classification agrees with the results of recent molecular-based phylogenetic studies; but we note that for only few of the numerous genera currently assigned to one of the formerly "ectobiid" families this assignment is supported in a phylogenetic sense (taxa in Djernaes et al. 2020: table 4 plus taxa additionally sampled in Evangelista et al. 2021). Regarding the assignment of genera not included in recent phylogenetic studies to the five main classificatory units of Blaberoidea, we follow Beccaloni (2014; exceptions to this are specified below). To address the former "Ectobiidae", which is occasionally needed for the sake of their shared plesiomorphies and for comparison with older literature, we use the term "non-blaberid Blaberoidea".

Hymenoptera-Formicidae.
Regarding genus-and species-level taxonomy of the reported host ants of Attaphila we follow the catalogue of Bolton (2021). Phylogenetic and evolutionary hypotheses are taken from Schultz and Brady (2008), Branstetter et al. (2017), and Cristiano et al. (2020), who used successively increasing taxon samples. Cristiano et al. (2020) find the leaf-cutting ants and its three genera monophyletic, with the relationships Amoimyrmex + (Acromyrmex + Atta), the genus Amoimyr mex having been newly defined therein (its species were formerly assigned to Acromyrmex).

Preparation of cuticular structures
Soft tissues were removed by treatment with 10% KOH at 40°C for 12 hours. For examination the cleared cuticular parts were either put in a petri dish (direct examination for drawings) or slide-mounted in Euparal using tiny glass rods as spacers between slide and cover slip (for photography). Slide(s) and the remnants of the corresponding specimens got an identification code (Xy or XY numbered) specified in the 'Material studied' paragraphs of the species descriptions and in the figure captions; the letter combination Bo is used for material not belonging to the collection of H.B., all other combinations indicate the country of origin: Al Algeria, Cb Colombia, CR Costa Rica, Ma Morocco, Sp Spain.

Illustrations and orientation
Regarding photography, the phase contrast images were made with a Sony Nex-5N camera on a Zeiss Photomikroskop II, all other photos were made with a Jenoptic camera (ProgRes SpeedXTcore5) on a Leica microscope (DM 5000B) using software ProgRes CapturePro v.2.8.0 and Helicon Focus 5.3. For drawings, the preparations were examined under a Leica M125 stereo microscope and gradually dissected; initial handmade drawings were scanned and then completed using the computer programs CorelPhotoPaint and CorelDraw. In the figures the orientation of the structures is -unless otherwise stated -with the anterior end on top, or with the base on top (antennae, legs, tegmina); tergites shown in dorsal, sternites in ventral view. For legs and tegmina morphological orientations are given as if they were stretched at right angle from the longitudinal axis of the body towards the side.

Morphological terminologies and concepts of abbreviation
Armament of tibiae. The distribution of spines on fore-, mid-, and hindtibia is -as hitherto (see e.g. Bohn et al. 2010) -specified by the following formula: [d·a·v] [d·a·v] [d·a·v]. Compared to the numbering system for tibial spines introduced by Klass et al. (2009), the explanation of the letters is now read as follows: d number of spines on the dorsal surface outside the apical armament (spines Td excluding Td1m), a number of spines of the apical armament (terminal tibial spines Tt1-5 plus distidorsal spine Td1m), v number of spines on the ventral surface outside the apical armament (spines Tv in Klass et al. 2009).

Borders of tergites.
In the preparations of successive abdominal tergites (e.g. Fig. 6) there are many transversal lines of different kind and distinctness; as some are important in the descriptions, the pattern is briefly explained and illustrated in Supplement 2 ( Fig. S1 and associated text). The taxonomic descriptions consider mainly the following lines (n representing the sequential number): The posterior borders of tergites (posterotergal bending lines Tn-p, fixed and discrete); the anterior borders of tergites (anterior margins of tergites Tn-a, fixed but rarely discrete); the lateral borders of tergites (lateral bending lines of tergites, fixed and discrete); and the tergal transversal ridges (trn, fixed and usually discrete). Note that the anteroposterior succession of the transversal lines is not always regular due to a longitudinal shift of part of the series of tergites (as evident from Fig. S1D).

Bristles on tergites.
Bristles can be present along the transversal ridge (trn), along the lateral and posterior borders, and on the surface area in between. Those in between are called 'surface bristles'. The center of a surface area is its middle part both in the longitudinal and the transversal direction.
Male and female genitalia. Selecting a terminology and associated abbreviations is problematic for both sexes.
There are, on the one hand, simple terminologies that have been used in recent taxonomic contributions on Blaberoidea, e.g. that of H. Bohn  out Dictyoptera or Insecta, and homonomies among segments. Its abbreviations are designed according to a coherent system (e.g. by using different kinds of terms for sclerotisations and elements of shape, such as processes), and the abbreviations actually constitute the terminology. This complex terminology provides names for most elements of the genitalia. However, it has not yet been applied to a broader sample of Blaberoidea, where some homology problems need to be resolved prior to its broad application to this taxon. To cope with this conflict, we apply herein a mixture of the terminologies used by Bohn and Klass. The synonymy between the two is given in the text at first mention and is surveyed in Supplement 3

Sources for comparison
For comparing any body parts between Attaphila and other cockroaches (especially Blaberoidea), we used a variety of taxonomic papers, focally those of H. Bohn, to the extent these include relevant information; and we used several morphological treatments (such as Wipfler et al. 2016 on the head of Periplaneta americana). For the antennae we provide illustrations based on own studies on some Blattellidae species (Fig. 2). For the genitalia, which are only superficially described in most of the taxonomic literature, we additionally used morphological contributions. The main data source for female genitalia is McKittrick (1964, abbreviated MK64 in the following), where a fairly rich selection of Blaberoidea is covered; in her drawings, however, many spatial relationships between structural elements are unclear, which makes comparison difficult. In addition, the very limited information in Klass (1998: Supella being the only sampled blaberoid) was used; and Brannoch et al. (2017) was taken for interpretation at the Dictyoptera level. The main data sources for male genitalia are MK64 (with the same problems as for female genitalia) and Klass (1997), where cockroach phallomeres are described in great detail, but only for very few blaberoid species. In addition, for some crucial points we provide illustrations from own preliminary studies on genitalia of selected Blattellidae and Ectobiidae .

List of abbreviations
Morphological terms. All abbreviations are listed in Supplement 1; those used in the figures are additionally listed in the associated legends. The abbreviations T + number (abdominal tergite) and S + number (abdominal sternite; S7 = subgenital plate of female; S9 = subgenital plate of male) are frequently used in the text; terms like T6,7 and S1-5 refer to two or several, respectively, tergites or sternites, as indicated by the numbers. Lower-case n in italics is inserted in morphological terms to address all numbered elements in question.  Entire head with focus on antennae and circumantennal pit (inset: median part, darkened). B: Entire head with focus on mouthparts (cardo and stipes seen behind circumantennal pit; inset: scheme of mandibular dentition in anterior view, md l = left, md r = right, elements above transversal line belonging to mola). C: Entire head with left antenna rectangularly bent between scapus and pedicellus. In A-C different levels of tentorium visible internally. D: Base of right antenna and surrounding parts of head capsule at higher magnification, also showing dorsal excavation at distal end of scapus allowing the strong bend shown in C. E-H: Thoracic nota of Attaphila species. E: All thoracic nota of a female, stretched. F: Pronotum of a male. G, H: Right part of metanotum of males with the strongly reduced hindwing. -Species: A-C: A. aptera, male (A, B: Bo 1224), larval female (C: Bo 1243); D: A. fungicola, male (Bo 1229); E, G: A. bergi, female (Bo 1239), male (Bo 1283); F, H: A. paucisetosa, male (Bo 1240). -Abbreviations: ata anterior tentorial arm; atb anterior tentorial bridge; atp anterior tentorial pit; car cardo of maxilla; cap circumantennal pit (with sharp dorsal edge capd visible and bottom capb of the pit shining through); cc coronal cleavage line; cpe compound eye; ct corpotentorium; fc frontal cleavage line; fl fagellum (all antennomeres following pedicellus, numbered from base as fl1 etc.); hw hindwing; hwar level of (reduced) hindwing articulation; li lacinia; lp labial palpus (I-III: palpomeres); md mandible (left md l , right md r ; I-IV: tip and incisivi); mo mola of mandible; mp maxillary palpus (I-V: palpomeres); N thoracic notum (N1 pro-, N2 meso-, N3 metanotum); pc pedicellus; pta posterior tentorial arm; sc scapus; sc-pc scapus-pedicellus articulation; scex dorsal excavation at distal end of scapus; s-chA field of sensilla chaetica A; s-cpf row of sensilla campaniformia; sti stipes of maxilla; tp tentorial perforation.

Museums and collections.
Below we use abbreviations including the full name of the city (usually following M. = Museum), but here we additionally list the acronyms suggested by Evenhuis (2016) Figs 21D,28 Size very small, 2.5-3.5 mm long. Body rather stout, in dorsal view wide-oval, with strongly vaulted thoracic dorsum. Surface of pronotum, tegmina, and abdominal tergites up to T5 loosely covered with rather long and thin bristles. Colouration almost uniform, in larvae yellowish, in imagines slightly darker, orange-brown; legs always darker than the remaining parts of the body. Compound eyes (Fig. 1A, D: cpe) placed laterally, very small, not prominent from overall outline of head, with not more than about 70 ommatidia (see also Wheeler 1900). Ocelli missing.

Head
Antennae (Figs 1A,C,D,2): Scapus (sc) relatively long, with a distinct bend of ca. 70° at its very base (in anterior view: Fig. 1D); pedicellus (pc) and few basal flagellomeres (fl1 and following) rather short; the distally following flagellomeres rapidly increasing in length, reaching their maximal length about at the level of the 7 th flagellomere (ca. 3.4 × as long as wide; Figs 1A, 2F, G); diameter of flagellomeres slightly increasing up to the 6 th or 7 th , then slightly decreasing again; shape of flagellomeres conical, widening towards their apical end. Number of flagellomeres unknown: in imagines in most cases 7-10 (only one specimen found with 11) were present, but all antennae appear as being incomplete (Wheeler 1900;Bolívar 1901Bolívar , 1905Brossut 1976), since an intact terminal flagellomere with apically closed cuticle has never been observed (but see larval development in 3.13.). Retained distal flagellomeres according to Brossut (1976: figs 4, 5) provided with a relatively low number of sensory bristles. Hebard (1916) reports that "the joints beyond the first [scapus] are carried normally at a decided angle to it". Among the specimens available to the authors several showed an almost rectangular upward deflection of the pedicellus versus the scapus (Fig. 1C); the strong deflection is enabled by the scapus having distally a distinct rounded dorsal excavation ( Fig.  1D: scex, which is flanked by the two usual scapo-pedicellar articulations, one visible in Fig. 1D: sc-pc). Two fields of sensilla basally on the scapus and one basally on the pedicellus are likely comprised of sensilla chaetica A ( Fig.  1D: s-chA), and a few sensilla distally on the pedicellus are likely representatives of a circumferential row of sensilla campaniformia ( Mouthparts (not studied in detail) with mandibles (md) and laciniae (li; Fig. 1B) shaped as typical for cockroaches (see Wipfler et al. 2016); mandibular dentition asymmetrical as usual in cockroaches: left mandible with 4 teeth, right one with 3 teeth (Fig. 1B  F). Maxillary palps with 5, labial palps with 3 palpomeres (I-V of mp, lp in Fig. 1B), the apical one in both cases the longest and widest, and, according to Brossut (1976: figs 6-9), on the ventral surface densely covered with sensory bristles; mpIV with a distinct basal bend.
Tentorium (Fig. 1A, C, D) of typical blattodean structure (compare Klass and Eulitz 2007: figs 2-8), with anterior transversal bridge (atb) and perforation (tp) behind it; origin of anterior arms (ata) from head capsule in typical position but very narrow (Fig. 1C, D). Pronotum (N1) almost completely concealing the head, in dorsal view rounded-trapezoidal, narrowing towards the anterior, with almost straight anterior border. Meso-(N2) and metanotum (N3) in females (in dorsal view) with fairly straight anterior and posterior borders and widely rounded anterolateral corners; in males more or less trapezoidal, narrowing towards the posterior (Fig. 1G, H).   Rather short and stout. Each coxa with a distinct coxal lobelet (colb) on its distal border (as in most or perhaps all Dictyoptera). Femora (fe) and tibiae (ti) anteroposteriorly compressed. Femora at the base with steeply increasing height (dorsoventral extension). Anterior and posterior walls considerably protruded beyond the narrow ventral surface (edges fane and fpoe), thus forming a proximally flattening groove (femoral groove fegr) which can take up part of the tibia during a strong flexion (Fig. 4A Fig. 4D, G, likely result from regeneration after loss), tarsomeres 1-4 fairly cylindrical, without basal constriction, tightly closed together, borders between them oblique, without euplantulae, ventroapically supplied with small spines in a transversal row. Pretarsus consisting of two symmetrical unspecialised claws (ptcl) and a large arolium (ptar) in between.

Legs
Spine armament of femora. Forefemur ( Fig. 4D) with only one apical spine, positioned at the anteroventral edge (fane) and proximally followed by a row of more or less strong setae (Type D1, Roth 2003). Midfemur (Fig. 4C) also with only one spine, but apically at the dorsal surface (gs = genicular spine). Hindfemur (Fig. 4A, B) also with one genicular spine and 2-4 spines at the anteroventral edge (fane); one of the latter always near midlength of femur, the others at some distance near apex.  , with conventional terminology of tibial spines. E and F show a general scheme of cockroach tibia spination of the foreleg (E) and midleg (F; similar on hindleg) (tibia base on top, tibia cut along ventral midline and spread, spine bases represented by circles filled with different colours according to groups of spines) and distal part of tibia of fore-(E), mid-, and hindleg (F) of Attaphila (from B, C, D, 1.5× enlarged), with spine terminology according to Klass et al. (2009) and unpublished work by K.-D. Klass and coworkers. G and H show tarsus of left (G) and right (H) foreleg enlarged (compare D); white arrow in G pointing to dorsal vestige of subdivision between tarsomeres 1 and 2. -Abbreviations: co coxa; colb coxal lobelet; tc trochanter; fe femur; fegr ventral groove of femur which can take up part of tibia during strong flexion as shown in (A) (bottom of groove indicated); fane and fpoe antero-resp. posteroventral edge flanking femoral groove; ti tibia; tiaa and tiap anterior resp. posterior articulation of tibia with femur; tivt ventral basal tendon of tibia; dft dorsal fold on apical margin of tibia; itts intertibiotarsal sclerite; pdta posterodorsal tibiotarsal articulation (on opposite side of leg); ta1-5 tarsomeres 1-5; ptcl claws of pretarsus; ptar arolium of pretarsus; gs genicular spine of femur. and a distal anterodorsal spine (Td1m a ). Foretibia with no dorsal (besides Td1m a ) and no ventral spine; midtibia with 4-5 dorsal (in addition to Td1m) and 1 ventral spine; hindtibia with 6-9 dorsal (in addition to Td1m) and 1 ventral spine. The numbers of spines on femora and tibiae show fairly wide ranges of variation within the species combined with much overlap among the species; spine armament is therefore unsuitable for species identification.

Figs 5-13
Shape. T1,2 with weakly convex, T3-6 with fairly straight posterior border (Tn-p). T7 of females (e.g. Fig. 6E) in the median half with a short, wide lobe-like posterior expansion, whose posterior border is medially slightly convex or concave, or straight; posterior border T7-p laterally of the lobe concave; transversal ridge tr7 always distinct and in parallel with the posterior tergal border T7-p. T7 of males ( Fig. 6A) with median lobe less prominent, transversal ridge tr7 usually distinct, but in some species weakly developed (Fig. 13D) or completely missing (Fig. 13E, F). T8,9 (Figs 6B, 7C) in both sexes rather short, weakly sclerotized, concealed below the preceding tergite T7. T10 (Figs 6B,19A) rather short, with widely rounded posterior border T10-p; the lateral parts T10p bending to the ventral side (to meet the paraprocts, PP) are very narrow (Fig. 5J, K, arrows point to contact between T10p and PP).
Distribution of bristles. T1-5 usually loosely covered with long and thin bristles; the males of A. aptera and A. bergi on T1 without such long bristles. They are in all species arranged in one line along the lateral and posterior borders. The distribution of the remaining bristles on the surface, between the transversal ridge trn and the posterior border Tn-p, is species-specifically different: either in only one distinct transversal line (Fig. 9B, E), in two very irregular transversal lines (Fig. 7A), or more or less irregularly dispersed (Fig. 8C). The bristles along the lateral borders are usually slightly shorter, but stronger than those along the posterior border and on the surface; the bristles along the posterior border of T5 are often more densely arranged than on the preceding tergites (Fig. 7A, D). T6,7 in both sexes along the lateral borders with similar bristles as on the preceding tergites. Size and arrangement of bristles at other places of T6,7 different in the two sexes: Females (Figs 12A-F, 13A, B) always without bristles along the posterior border of both T6 and T7. Transversal ridge tr6 usually with several bristles of small or medium size, tr7 with only two rather small bristles at a distance of about ¼ of tergite width. Surface behind the ridge provided with bristles species-specifically varying in size and number; the bristles are usually arranged in a wide median transversal stripe of varying lateral extension (ranging from slightly less than ½ to about ⅔ of tergite width), on T7 usually in lower density and extension. Males (Fig. 13C-F) with much smaller bristles along the transversal ridge, bristles on the surface or along the posterior border present or absent.
Male tergite glands. Glandular pores occur on T1-5 in the area anteriorly of the transversal ridge, mostly rather dispersed, but in A. aptera in extremely high density (Fig.  5A, B); they are usually tiny, larger ones are found in and near the specialisations on T2 (msl2).
Male tergite specialisations. The males of A. flava, A. fungicola, and A. paucisetosa have a pair of specialisations laterally at the anterior border of tergite T2, each consisting of a shallow transversal trough with a mesolateral extension of about ¼ of tergite width (Figs 9B, 5E-I: msl2). The bottom of each trough shows a more or less complicated relief generated by rather low, rounded ridges crossing the trough. The males of A. aptera and A. bergi have a specialisation medially on tergite T1. In A. aptera (Figs 6A, 5A, B: msp1) this is a small, fairly rounded, weakly sclerotized area with two groups of rela tively long bristles pointing anteriorly, located immediately posterior to ridge tr1. In A. bergi (Fig. 5C, D: msa1) the specialisation consists of a pair of small areas in the anterior part of T1 showing a net-like pattern produced by delicate furrows (for the identification as furrows rather than ridges see explanation in Supplement 6 Fig. S4), along which tiny glandular pores are sporadically arranged; specialised areas occasionally with few small bristles (Fig. 5D). The net-like pattern of the specialisation is strongly emphasised microreticulation, which is continuous with much less emphasised microreticulation further posteriorly on T1. T1 in the former three species and T2 in the latter two species without specialisations. T1 in the latter two species ad- -Abbreviations: T1-a, T2-a anterior borders of tergites T1,2; T1-p posterior border of T1; tr1, tr2 transversal ridges of T1,2; msa1 anterior median specialisation of tergite T1; msl2 lateral specialisation of tergite T2; msp1 posterior median specialisation of tergite T1; pg pores of glands, tiny in A, B, between T1-a and tr1, larger in E as part of msl2 specialisations. -J, K: Paraprocts, tergite 10 and cerci in ventral view, of J: A. aptera (Bo 1224) and K: A. paucisetosa (HT Bo 1258). -Abbreviations and arrows: Ca sclerite at mesal base of cercus; ce cercus; hmp hook-like mesal projection of paraproct; PP l , PP r left and right paraproct; T9 tergite 9; T10 tergite 10 with its ventrally bent lateral (paratergal) parts T10p (larger median parts of T10 out of focus); white arrows: articulation between mesal end of T10p and lateral end of paraproct. B: Terminalia (Bo 1256), ventral view, with T9 and T10, cerci, and paraprocts.

C-E:
Female

Grey arrows pointing
to median and lateral excurvations of transversal ridges to the anterior.  ditionally characterised by the abovementioned absence of long bristles on surface and lateral and posterior borders.
Tergite T9. In both sexes T9 and T8 are very short and entirely hidden as they are overfolded by the hind part of T7. Dorsolaterally the anterior border of T9 of both sexes forms on each side a distinct semicircular apodeme (ltga9, for males in Figs 6B, 7C; schematic view in Fig. 28G). The ventrally bent lateralmost part of T9 (paratergal part T9p) is narrowed towards the anterior, its terminal part forming an anteromesally directed, slightly mesally curved sclerite arm running along the anterior border of segment 9 (paratergal extension pt9 of male, pt8,9 of female). The tip of this arm closely approaches the lateral margin of S9 in the male, forming a loose articulation (A1) with it (Figs 24A, 25A-D, 29C, H); in the female it approaches the lateral gonangulum sclerite (ggl) if this is present, forming a close articulation (A1) with it ( Fig. 19A; for further contacts of the female pt8,9 see 3.9.). In both sexes the paratergal extension is strengthened by an internal ridge, which is part of the antecosta of segment 9 (ac9, for male see inserted section in Fig.  29G). We call the arm of the female pt8,9, as generally in Dictyoptera the posterior part of T8 contributes to this structure (although with varied clarity in different taxa, and not resolved for Attaphila; Klass 1998: figs 11-18;Brannoch et al. 2017: TG8+9ε in fig. 14C). In the male we call the arm pt9, as there is no indication of a contribution from T8.

Cerci
Very short, without any annular divisions; dorsal surface almost plane, smooth, lateral and mesal flanks of cerci not visibly depressed to form a keel (compare Lobopterella in Fig. 29D); bristles and sensilla mostly restricted to the vaulted ventral surface. Outline in ventral or dorsal view egg-shaped (males of all species, Fig. 6B, and female of A. schuppi, Fig. 20C, D); or asymmetrically widened (more strongly laterally) and wider than long (remaining females, Fig. 19A). Subgenital lobe in all species with three short rounded apical lobes, a very wide median one and two much narrower and slightly shorter lateral ones. S7 either semicircular (A. sexdentis, Fig. 17F) or rounded-rectangular (remaining species, Fig. 17B). In semicircular type anterior border strongly curved and lateral borders anteriorly converging, thus all together forming an arch. In rounded-rectangular type anterior border less strongly curved and lateral borders parallel, thus all together being quite rectangular. Subgenital plate towards its anterior border with rather weak, gradually fading sclerotisation; anterior outline in the figures, therefore, not always well visible. The transversal sternal ridge (sr7 in Figs 16, 17), starting latero-posteriorly at the lateral base of each lateral lobe, forms a wide anterior curvature; lateral parts (sr7-l) very steep and reaching far to the anterior (yet converging), either fairly straight (Fig. 16A) or more or less strongly curved mesad around their midlength ( Fig. 17A-D), near the anterior border of S7 continuing into the transversal median part of the ridge (sr7-m in Fig. 16A). Median part either continuous across middle (only A. bergi, Figs 16A, B, 18C, D), or with some traces of discontinuities (arrows in Fig. 18E, G), or with a distinct gap of varied width (between bars in e.g. Fig. 18A, I, J). The median part sr7-m of the ridge is best examined at high contrast, because with low contrast parts of it can be difficult to recognise (compare Figs 17E and 18G, which were made from the same object). The different course of the anterior border of S7 in the two types correlates with a different extension of sclerite S7 beyond the lateral parts of the transversal ridge in anterolateral direction: it is very wide in the rounded-rectangular type, but rather limited in the semicircular type with anterior border and transversal ridge running almost in parallel at short distance. Surface of S7 in the posterior 2/3 covered with dispersed rather long and strong bristles, especially densely arranged along the posterior border.

Abdominal sternites
Male subgenital plate S9. Anterior part with a pair of rather long, slender, and strong apodemes (sta9) of about equal length (Figs 24A-D, 25B, C). Posterior part located in ventral wall of subgenital lobe (expanded ventral fold vf9). Subgenital lobe in all five species with males known (Figs 24-26) with a deep excavation along the left side, the conical left stylus (sl l ) inserted at the base of the excavation, not reaching tip of lobe; the more strongly projecting right part of the subgenital lobe tongue-shaped. In A. aptera and A. bergi right part of lobe widely tongue-shaped, without excavation on right side; a small knob-like right stylus (sl r ) present, situated subterminally on right flank of tip ( Fig. 24A-D). In A. flava, A. fungicola, and A. paucisetosa right part of lobe narrowly tongue-shaped (and slightly curved towards the left) due to an excavation on right side, which is of similar depth as the excavation on the left side; right stylus absent ( Fig. 25A-D). Due to the presence of an excavation on only one side the subgenital lobe appears very asymmetrical in the two former species, whereas due to the presence of an excavation on each side the lobe appears quite symmetrical in the three latter species. On each side the lateral margin of the subgenital plate articulates with the ventral extension of tergite 9 (pt9, e.g. Fig. 24A; see 3.6.).

Female genitalia
Overall structuring largely as typical for Blattodea: There are two cavities in anteroposterior succession, i.e. a large posterior vestibulum (space above subgenital lobe vf7), which continues anteriorly into a narrower genital chamber. The elements of the female genitalia are distributed over the upper and lower walls of these cavities. Problematic interpretations are discussed in Supplement 5.
The genital chamber (gc) is divided in a dorsal and a ventral subchamber by a flat transversal fold arising from the anterior and lateral walls of the genital chamber (genital chamber fold gcf in Fig. 23A, B, its posterior edge labelled gcf in Figs 19A, B, 21A; fold in same position as the one bearing 'sp.pl.' in MK64: fig. 40A of Supella, but much deeper); fold gcf is asymmetrical, projecting further posteriorly on the left side. The gonopore (opening of common oviduct oc) lies in the anterior wall of the ventral subchamber (Fig. 23A, B); there is no genital papilla, but the oviduct widens quite gradually and continues into the lumen of the chamber. The spermathecal plate (sp; SP in Supplement 3 Fig. S2B) lies in the dorsal wall of the fold gcf (Fig. 23A); like the fold it usually exhibits a distinct asymmetry (with a left-side focus in Figs 23A, S2B); a division was not observed. We did not find any paired or unpaired cuticular structures that could reasonably be considered spermathecae, neither on plate sp, nor in any other position. The anterior wall of the dorsal subchamber forms a folded, anteriorly directed pouch (genital chamber pouch gcp in Figs 19-21, 23A) on the side opposite to where the spermathecal plate has its focus.
The left and right valvifers (vlf = part of 8 th -segmental coxal sclerites CX8; Figs 19-21, 23A) in the roof of the genital chamber (gc d ) strongly converge anteriorly, where they are connected across the midline, forming together a single arch-shaped sclerite. The posterior ends show a discrete contact (articulation A5) with the paratergal extension (pt8,9), and the adjacent part of vlf is curved laterally (often showing some asymmetry). The anterior part traversing the midline appears as a discrete ribbon-like continuation of the posterolateral parts in some species (Figs 19A,B,21B), but is indistinctly delimited, weaker and wider, and perhaps incomplete in others (mesad of arrow in Fig. 20B, D; a distinction between valvifer arch and spermathecal plate, which are placed one above the other in a preparation, is then partly difficult). Note that the area where the valvifer arch crosses the midline is placed morphologically posteriad of the spermathecal plate. Individualised basivalvulae (part of 8 th -segmental coxal sclerites CX8) were not found; these sclerotisations could be included laterally in the sclerite here called vlf, or in the sclerite ls (see below), or be absent (discussion in Supplement 5). In some species the central dorsal wall of the genital chamber (gc d ) bears a microsculpture of small knobs (Figs 19A, 21A, B, shown enlarged in inserts), possibly associated with very weak sclerotisation that appears medially divided (putative mesal border shown by arrow in Figs 19A, 21A, B and their inserts).
Of the gonangulum (gg = 9 th -segmental laterocoxal sclerites LC9) the mesal part (gg-m in Figs 19A, B, D, 20B, D, 21A, B) is distinct; it forms the typical articulations A2 (with the posterior lobe pl, see below; Fig. 19A, B) and A3 (with the gonapophyseal sclerotisation GP8 at the dorsal base of the 1 st valve; Fig. 19A). The lateral part (gg-l) forming a hinge-like contact A1 with the paratergal extension pt8,9 (see 3.6.) is present in A. aptera (Fig. 19A; lateral part of LC9 in Fig. S2A, B), where it is completely separated from the mesal part, but appears to be absent in the other species (Figs 19B,D,20B,D,21A,B).
The anterior arch (aa = anterior part CX9µ of medially fused 9 th -segmental coxae CX9, compare Fig. 19A and Supplement 3 Fig. S2C for its outline) usually has a darker anterior margin, possibly due to a transversal internal ridge. The shape of the anterior border of aa appears to vary among species, being straight, biconcave, or convex to a varied extent (compare Figs 19A,B,D,20B,D); however, its shape could be influenced by the angle of view upon the preparation. The posterior lobes (pl = posterolateral parts CX9β of 9 th -segmental coxae CX9, see Supplement 3 Fig. S2A, B) are well developed.
The 2 nd valves (v2 = 9 th -segmental gonapophyses gp9) and the 3 rd valves (v3 = 9 th -segmental gonoplacs gl9) overall show the usual configuration, but their structural details, especially those near the base, are not seen in the preparations due to the overlapping of several elements in the area.
Intercalary sclerites (IC in Fig. 19A, B) are very weak, often indistinctly delimited, limited to the median area, likely medially fused, and close to the paraproct anterior border.
The floor of the vestibulum (= dorsal wall of subgenital lobe vf7; vfl in Fig. 22A, B, 23A) appears to be entirely membranous. It bears membranous folds (which are part of vfl): a pair of longitudinal intersternal folds (isf in Figs 22D, H, 23A) and a transversal ventral vestibular fold (vtf in Fig. 23A) between them. When the membranous floor of the vestibulum is cut off from the sclerotised, stabilising ventral wall of the subgenital lobe, sternite S7, the folds tend to get distorted or to collapse (as in most pictures of Fig. 22).
The laterosternal-shelf area represents the posterior floor of the genital chamber adjoining the floor of the vestibulum. A large W-shaped laterosternal-shelf sclerite (ls in Fig. 23A, halves of W open posteriorly; LG7 + LC8? in Fig. S2E) extends over this area, anteriorly and laterally of the isf folds. The middle part of sclerite ls is U-shaped (U open anteriorly, i.e. the middle peak of the W is rounded or truncate), consisting of a central arch (ls-c) and lateral arms (ls-a in Figs 22A, 23C). The elongated, oblique lateral parts, the wings (ls-w in Fig.  22A), have a plate-like anterior portion, but extend far posterolaterally, where they become much narrower; the apical parts (ls-p, possibly the "posterior extensions" sensu MK64, then part of laterocoxa LC8) are twisted relative to the wing part ls-w (black arrows in Fig. 22A, D, I).
Where the middle and lateral parts of sclerite ls approach         Fig. S2A, B, C for additional explanations and more complete labeling using different terminologies.) each other, a deep, anteriorly directed tube-shaped pouch is present on each side, the laterosternal-shelf tube (lst in Figs 22A,23). The pouch is rolled up and thus has a C-shaped cross section in its anterior part (lowest cross section left of Fig. 23D: the black margins of the C represent the cuticle, the body of the C is external world, the areas surrounding the C -including the area embraced by it -represent the interior of the animal). Both the arm and wing parts of sclerite ls extend into the tube walls and bend along them (shown in Fig. 23C-F and G-J), whereby much of the lst walls are sclerotised; ls-a and ls-w are likely synsclerotic inside the tube (at edge indicated by grey arrows in Fig. 23E-H; but a clear observation was not possible). A laterosternal shelf, i.e. a physical step upward between the floors of vestibulum and genital chamber (see MK 1964: figs 2, 10, 40b, representing the 7 th -segmental genital lobe) is absent.
The laterosternal shelf area shows considerable interspecific variation and can, therefore, serve as an important means for species distinction in the female sex. This concerns the shape of the central sclerotisation ls-c and of the tubes lst ( Fig. 22), the anterior extension of the wing part ls-w on tubes lst (blue arrowheads in Fig. 22), and the anteroposterior position of the area where the anterior margin of the arm part ls-a bends from the ventral inner wall of the tube into the dorsal one (red arrowheads in Fig. 22; often associated with a laterally directed angular bend or kink). The shape characteristics of the tubes lst (as seen in preparations: Fig. 22) appear variously reliable due to the composition of the tube walls of sclerotised and membranous parts. For instance, the (inner) lateral border of lst is sclerotised and thus stable anterior to the red arrowheads (reliable), but membranous and thus flexible posterior to them (not reliable; area indicated by black arrowheads in inserts of Fig. 22B, D, E, K); the distinctness of the angular bend depends partly on the mesal bending of the posterior part (compare left and right sides in Fig. 22I, L) and is thus not a very reliable character.
In situ, the lateral wing parts (ls-w) of sclerite ls are positioned beneath the area embraced by the lateral parts of the valvifer arch (vlf), but extend further posterolaterally beneath the paratergal extensions (pt8,9; Fig. 20A, compare labelling on left and right sides). The central part (ls-c) is then placed beneath the anterior arch (aa; compare positions of ls-c in Fig. 20A and aa in Fig. 20B), and the arms ls-a and tubes lst reach anteriorly well beyond the anterior bottom of the dorsal genital subchamber. The intersternal folds (isf in Fig. 22D), which follow behind the ls-c part (upward in Fig. 20A), are in the right place to embrace the group of valves located above them in the roof of the vestibulum, and to form a mould for a new ootheca built in the vestibulum. The case where the central part (ls-c) is placed further posteriorly beneath the central apodeme, and where the arms (ls-a) and tubes (lst) do not exceed the dorsal genital subchamber (Fig. 21C) could be due to artificial shifts during dissection.

Female gonads
The ovarioles of Attaphila fungicola are described by Roth (1968: fig. 17) as being similar to other non-blaberid Blaberoidea ("Blattellidae" therein), with only one oocyte showing incorporation of yolk material.

Ootheca
A female carrying an ootheca was only once observed, among the specimens of A. paucisetosa collected by one of the authors (R.R.G.) in a nest of Atta cephalotes in Colombia (Fig. 21D). The ootheca appeared scarcely sclerotised, with a very low brownish keel (otkl), and contained five eggs; their upright orientation and the dorsal position of the keel signalise that the ootheca was not rotated. Since the female was fixed shortly after its capture, the question of a possible rotation of the ootheca before its deposition could not be resolved. With the very soft sheath and the low keel the ootheca resembles that of ovoviviparous species. These features can be seen as an adaptation to the certainly moist atmosphere in the mushroom chambers of the ants, which makes a strong hardening of the sheath unnecessary. A weakly developed keel was also described by Roth (1971: fig. 81) for the ootheca of A. fungicola. Waller and Moser (1990) placed alates of Atta texana with attached A. fungicola females in jars. Within few days the females produced oothecae, which they deposited at the bottom the jars. Unfortunately, it is not noted whether the oothecae were rotated prior to their deposition.

Male genitalia
All interpretations of structural components are unproblematic (i.e. there are no major homology problems relative to other Blaberoidea). Fig. 24A, E; process hla bearing L3 sclerite in Supplement 4 Fig. S3A, B) fully retractable due to a long membranous proximal part, which is inverted in the retracted condition (part p, inverted in Fig. 24E, everted but only a short part included in Fig. 25E); sclerotised distal half with a wide basal part (b), a much more slender, variously widely curved intermediate part (n neck), and a claw-shaped apical part (cl) bearing an anterior groove (hge) with a cleft (hcl). Endophallic apodeme (ea in Fig fig. 273), but their extension, structure, and occurrence in the various species remained quite unclear. The tongue-shaped right branch of L2 extends posteriorly, its right-posterior parts being located in the dorsal wall of the angular or rounded, rightward-directed process psa. The sclerotisation of the virga (L2E) is probably not separated from that of the apodeme (L2D) by an articulation (A10; the apparent separation only in A. aptera seems to be due to a brighter area placed beneath, marked as A10? in Fig. 32F and Supplement 4 Fig. S3A). Opening of ejaculatory duct not unambiguously detected.

Larval development of some characters
Antennae. These could be studied in 25 larval specimens of various stages, which were roughly determined by measuring the width of the head; the incompleteness and heterogeneity of the material (larvae of several species had to be used) did not allow a clear distribution to specific larval stages. The antennae of the youngest available larva (A. paucisetosa, head width 0.52 mm, Fig but without corresponding constrictions; the completion of the flagellomere division would be expected to take place at the following moult. The specimen certainly represents a very early, presumably the second larval stage (the presence of a dividing meriston is not expected to be present in a freshly hatched larva). The remaining larvae belong to intermediate and late larval stages (head width 0.61-0.75 mm, Fig. 2C-E) and show with increasing size an increasing approximation to the imaginal structure of the antenna: interflagellomeral constrictions diminished, but flagellomeres still well set off by their conical shape, their length strongly increasing towards the antennal apex (Figs 1A, 2F, G). In two thirds of the larvae signs of a division of the meriston could be found, sometimes restricted to only one of the two antennae. The meriston can be divided into two flagellomeres of different size, the proximal one being much smaller than the distal one ( Fig. 2B, observed in seven specimens), or into three flagellomeres of fairly equal size (Fig. 2C, nine specimens). The divisions appear to be incomplete as in the young larva described above and obviously need at least one additional moult for completion. Even then signs of a previous division of the meriston may still be visible as is assumed for the antennae depicted in Fig Sex-specificcharacters. Species determination in larvae is difficult since the larvae are missing most species-specific characters. Larval stages of four species with available larval material (A. aptera, A. bergi, A. fungicola, A. paucisetosa) were studied for species-specific characters. As a result, three character sets were found which, under favourable conditions, may allow an identification at least in late larval stages: the bristle patterns on abdominal T2-5 and on T6,7, and, in the female sex only, the structure of the subgenital plate. The bristle patterns of T2-5 -surface bristles either in one transversal line or dispersed -are the same in imagines (of both sexes) and late larval stages; in earlier larval stages of all species the bristles are arranged approximately in one transversal line. The bristle patterns of T6,7, in the imagines showing strong differences between males and females, are the same in the larvae of the two sexes and correspond to the pattern of the imaginal female; the typical male pattern only appears after the imaginal moult ( Fig. 15F-L).
On the female subgenital plate S7, the transversal ridge (sr7) has in several species a very specific shape, which is already visible in late larval instars (Fig. 17G, H). For instance, an A. aptera larva (Fig. 17G) already showed the wide median gap of ridge sr7 as present in the adult

Diagnosis. Male:
Well characterised by several features unique in Attaphila: the specialisation on T1 involving moderately long bristles (msp1), the bristle distribution on T6,7 with numerous bristles on the surface but none along the posterior border, and the specially shaped virga (with a moderate sinusoidal curvature   (Fig. 3A, B) widest at about 2/3 of length; overall shape roughly triangular; posterior border convex from tegmen base (fwar) onward, its wide curvature very uniform throughout, joining the apical border far apically in a much tighter curvature (also tighter than in A. bergi); apical border transversal, fairly straight; surface bristles moderately strong. Hindwings fairly rhombic, with obtuse apex (similar to Fig. 1H). Glandular pores on T1-5 in the area between the transversal ridge and the anterior border, numerous and tiny, especially densely arranged in median third of tergite (Fig. 5A, B). Tergite 1 without long bristles on surface and borders (in contrast to long bristles on T2-5); medially, immediately posteriorly of the transversal ridge tr, with a specialisation (msp1) consisting of a more or less rounded, weakly sclerotised area with two groups of medium-sized bristles pointing anteriorly; on both sides of this area with some much smaller bristles of varying orientation (Figs 5A, B, 6A). Ridge tr1 almost continuous across midline, but more or less weakened and fragmented. Tergite 2 without specialisations. Tergites 6,7: (Figs 13C, 14I, 15F, H(larval)) Median lobe of T7 (definition in 3.6.) very short, but distinct; transversal ridges tr6 and tr7 well developed; posterior borders of T6 and T7 without bristles, surfaces with dispersed bristles of moderate to small size, on T6 larger than on T7, in radiating orientation. Subgenital lobe: (Fig. 24A, B) distal part with a deep excavation only along left side; lobe posterior to level of excavation widely tongue-shaped; with two styli, the larger left one (sl l ) conical, inserted at base of excavation, not reaching tip of lobe, the much smaller right one (sl r ) knob-like, situated subterminally on right flank of tip; stylus and borders of distal lobe with numerous bristles, most of them of moderate size, some rather long and strong. Phallomeres: (Fig. 24A, B) Sclerotised part of hook (h) from the long, wide base (b) very gradually narrowing into a slender, fairly short neck (n; shorter than in A. fungicola) which is hardly curved and bends almost rectangularly into the slightly wider claw part (cl). Endophallic apodeme (ea) not narrowed at base (forking site of sclerite). Relative to the axis of the endophallic apodeme (ea), the virga (vi) shows a distinct but quite shallow sinusoidal excurvation to the left, its apical part being moderately curved (back into the ea-axis) and gradually narrowed to a rather stout tip; virga longitudinally grooved. Paraprocts: Right paraproct with a sclerotised hook-like projection (hmp in Figs 5J, 6B), left one without a projection.

Male. Tegmina
Female. Tergites 6,7: (Figs 6E, 12A, 14A, 15G(larval)) Median lobe of T7 rather long; transversal ridges tr6 and tr7 complete, tr6 sublaterally at most with a very weak bend; surface bristles (definition in 2.4.) numerous and rather long and strong; focused to central (= longitudinal and transversal middle) part of surface area (between transversal ridge and posterior border). Subgenital plate (Figs 17C, D, 18A, B) rounded-rectangular, with parallel lateral borders; lateral parts of transversal ridge (sr7-l) in the middle with a shallow, but distinct mesally directed curvation, lateral terminal parts fairly straight; ridge mesally ending shortly after having reached a transversal orientation, with a very wide median gap, partly recurved sr7-m ends indicating the ridge to be at least slightly bisinuate. Genitalia: Spermathecal plate sp large (reaching far to the left), pouch gcp moderately sized (Fig. 19A). In laterosternal shelf sclerite (ls in Fig. 22A, B) central part (c) moderately long and posteriorly more or less transversally cut, arms (a) moderately wide, wing parts (w) moderately to very wide, their base restricted to posterior half of tubes (blue arrowhead); tubes (lst) slightly curved mesad and slightly narrowed towards the anterior. Lateral and mesal gonangulum sclerites distinct (gg-l, gg-m in Fig. 19A).

Distribution. Panama (Gamboa); Colombia (Dibulla).
Remarks. Attaphila aptera was described on the basis of a single specimen, a last-stage larval male which Bolívar (1905) interpreted as an adult; the corresponding adult stages were hitherto not known and their identification is problematic due to the scarcity of species-specific characters in larvae. A study of larval characters in four species (see 3.13.) has shown that the bristle patterns of tergites may contribute to an identification of the corresponding imagines: the bristle pattern of male (and female) larvae is very similar to that of the imaginal female.
The type specimen of Attaphila aptera has dispersed bristles on T2-5, thus ruling out the specimens herein classified as A. multisetosa, A. paucisetosa, and A. sinuosocarinata as its conspecifics. The bristles on the surface of T6,7 are numerous and relatively long and strong (Fig.  15H), comparable to those observed in larvae and females of A. bergi (Figs 14B, 15I, J) and of the specimens from Gamboa (Panama) found in the nests of Acromyrmex octospinosus and Acr. echinatior (Figs 14A, 15F, G). There is no similarity with the bristle pattern of the remaining four species, which, therefore, can also be eliminated from the list of candidates for conspecifity with the A. aptera type: A. sexdentis has considerably smaller bristles in much higher numbers and density, A. fungicola and A. schuppi have fewer and/or smaller bristles on T6,7. A. flava is only known from the male sex, but the high similarity with the male of A. fungicola justifies the assumption of a corresponding similarity between the females of the two species.
The long distance between the localities of the larval A. aptera type (Colombia) and the localities where A. bergi (Argentina, Uruguay) was found, and the different host species, Acr. octospinosus versus Acr. lundii (which are phylogenetically disjunct: Cristiano et al. 2020;Fig. 27), argue against the assumption that both could belong to the same species. The A. aptera type is much more likely conspecific with (or, at least, most closely related to) the species from Panama: their localities are much closer together and the host species reported for the A. aptera type is among the two host species known for the species from Panama. We did not find a character contradicting the assumption of conspecifity.
Because of the still existing uncertainties it may be seen as premature to assign the specimens from Gamboa to A. aptera. But the possible alternative, to describe them as a new species, appears to be less appropriate. If some day it turns out that the assignment to A. aptera is wrong, the species from Gamboa has to get a new name; if the alternative fails, the system is enriched by a new synonym.  of T6 and long bristles along the posterior borders, and the specially shaped virga (with a very strong sinusoidal curvature). With A. aptera it shares the absence of long bristles on surface and borders of T1. Female: Distinguished from all other species by S7 having a continuous, uninterrupted transversal ridge.
Male: Tegmina (Fig. 3C, D) widest at about 2/3 of length; overall shape more rectangular than triangular; posterior border straight or slightly concave near tegmen base (fwar), slightly converging with the apical border, soon bending into a rather tight curvation (as compared to A. aptera), finally joining the apical border in a still tighter curvation (though less tight than in A.aptera); apical border transversal, fairly straight; surface bristles strong (stronger than in A. aptera). Hindwings lanceolate, with narrowly rounded apex (Fig. 1G). Glandular pores only on T1, in the area of the specialisation and some more around (Fig. 5C, D). Tergite 1 without long bristles on surface and borders (in contrast to long bristles on T2-5); medially, about at the level of the medially obsolete ridge tr1 (far anteriorly on T1-a), with an inconspicuous specialisation (msa1) consisting of a pair of small areas showing a net-like pattern produced by delicate furrows or ridges along which tiny glandular pores are sporadically arranged; area in between either unstructured or with dispersed small pores, occasionally also with few small bristles (Fig. 5C, D). Ridge tr1 interrupted by the specialisation. Tergite 2 without specialisations. Tergites 6,7: (Figs 7B, 13D, 15A, I(larval)) Median lobe of T7 very short, but distinct; transversal ridge tr6 well developed, tr7 rather weakly developed, perhaps with gaps in lateral parts; posterior border of T6 and T7 with a row of rather long and strong bristles, almost reaching the size of those of the lateral borders; surface of T6 in the posterior half with dispersed bristles of slightly smaller size, sometimes distributed in two groups, of T7 only with few isolated and usually much smaller bristles. Subgenital lobe: (Fig. 24C, D) distal part with a deep excavation only along left side; lobe posterior to level of excavation widely tongue-shaped; with two styli, the larger left one (sl l ) conical, inserted at base of excavation, not reaching tip of lobe, the much smaller right one (sl r , relatively larger than in A. aptera) knob-like, situated subterminally on right flank of tip; stylus and borders of distal lobe with numerous bristles, most of them large (on average longer and stronger than in A. aptera), some rather long and strong. Phallomeres: (Fig. 24D-G) Sclerotised part of hook (h) from the long, wide base (b) very gradually narrowing into a slender, very short neck (n; shorter than in A. aptera) which is evenly curved into the slightly wider claw part (cl; neck thus hardly set off from both the base and the claw part). Endophallic apodeme (ea) not narrowed at base (forking site of sclerite). Relative to the axis of the endophallic apodeme (ea), the virga (vi) shows a distinct, deep sinusoidal curvature to the left, the apical part being very strongly and tightly curved (back into the ea-axis), and gradually narrowed to a rather acute tip ending shortly after the termination of the recurvation, hence hook-like (presence of a groove on the virga unclear). Paraprocts: Both lacking a sclerotised projection (Fig. 7C).

Distribution.
Argentina: Prov. Buenos Aires (Castelar, La Plata, Moreno), Prov. Entre Rios (Paranacito), Prov. Santa Fé (Rosario). The var. minor is reported from the Provinces San Luis and Catamarca; the report of A. bergi from Córdoba (Bruch 1929) most likely is a mistake and refers to the occurrence of var. minor in San Luis, not mentioned in this paper; Uruguay.
Remarks. The loss of the type specimens of A. bergi and the insufficient original description of the species prevent an unequivocal identification. But for several reasons the determination of the available Argentine specimens as A. bergi is most probably correct: They have the same host ant species, Acromyrmex lundii; no other species of Attaphila has so far been found in nests of this ant. The specimens studied are from at least 5 different localities in rather close distance, not very far from the localities of the type specimens (Argentina: Buenos Aires?, Uruguay), without showing remarkable differences among each other. Bruch (1916) described a var. minor occurring in nests of Amoimyrmex silvestrii (Prov. San Luis) and Acromyrmex lobicornis (Prov. Catamarca; belonging to Amoimyrmex or Acromyrmex clade not yet phylogenetically tested), of smaller size and paler colour than the nominate form. This characterisation and the missing of males raise the suspicion that the type specimens were larvae, possi-bly of normal A. bergi. On the other hand, the complete or partial association with Amoimyrmex hosts, which form the sister taxon of Acromyrmex + Atta and are thus phylogenetically far remote from Acromyrmex lundii (Cristiano et al. 2020) raises doubt on var. minor being conspecific with A. bergi. The type specimens of var. minor, formerly deposited in the Museo de La Plata, are no longer present there and presumably lost.

Diagnosis. Male:
The type specimen of A. flava is very similar to the male of A. fungicola and only shows slight differences in few characters: tegmina with apical border slightly convex, less oblique, surface bristles less strong; hook of left phallomere from the wide sclerotised base more gradually narrowing into a shorter neck, endophallic apodeme near its posterior base less strongly narrowed; and it has a different, though unknown host species.
Description. Size: Length of body (dried): male 2.83 mm. Surface bristles of tergites 2-5 dispersed, not arranged in transversal rows (Fig. 8D). Transversal ridges tr2-5 without distinct small excurvations to the anterior ( Fig. 8D; compare grey arrows in Fig. 11A), but male tr2 posteriorly of the specialisations with a wide excurvation to the posterior, mesally followed by a wide, very shallow excurvation to the anterior (grey arrows in Fig. 8D).
Male: Tegmina (Fig. 3E, F) widest at about 1/2 of length; slightly obtusely wedge-shaped due to the converging course of the basalmost part of the posterior border and the apical border, both connected in a rather wide curvature; posterior border with a slight concavity near the tegmen base, oblique apical border throughout slightly convex; surface bristles fine. Hindwings fairly rhombic, with obtuse apex. Glandular pores on T2-5 (and perhaps T1) in the area between the transversal ridge and the anterior border, dispersed, in moderately high density (Fig. 5I). Tergite 1 without specialisations (occurrence of long bristles could not be studied for T1; they are present on T2-5). Tergite 2 along anterior border with a pair of specialisations (msl2) consisting of a shallow, narrow transversal trough the bottom of which is patterned by low crossing ridges (Figs 5I, 8D; very similar to those of A. fungicola). Tergites 6,7: (Fig. 15C) Median lobe of T7 very short, but distinct; transversal ridge tr6 well developed, tr7 absent; posterior border of T6 and T7 with a relatively dense row of very short and thin bristles much smaller than those of the respective lateral borders; surface of T6 and T7 only with few isolated and very small bristles, still smaller than those of the posterior borders. Subgenital lobe: (Figs 25C, 26A) distal part with a deep excavation each along left side and right side; lobe posterior to level of excavations narrowly tongue-shaped and presumably inclined leftward (tip of lobe not retained in specimen); only left stylus present (sl l ), which is quite conical, inserted at base of left excavation; at the base of the right excavation with a group of short and strong bristles; stylus with few rather long and thin bristles. Phallomeres: (Figs 25C, 26A) Sclerotised part of hook (h) from the short, wide base (b) gradually narrowing into a slender neck (n; shorter than in A. fungicola) with a hardly curved proximal part, terminating in a slightly wider claw part (cl). Endophallic apodeme (ea) slightly narrowed at base (forking site of sclerite). Relative to the axis of the endophallic apodeme (ea), the virga (vi) shows a weak, very shallow sinusoidal curvature to the left, its apical part being hardly curved (back into the ea-axis) and gradually narrowed to a rather acute tip, distinctly more acute than in A. paucisetosa; virga likely longitudinally grooved. Paraprocts: Both lacking a sclerotised projection.
Distribution. Only known from the type locality Belize, Belize City.
Host species. Unknown, certainly not Atta texana as in A. fungicola since the distribution of this ant species does not reach further south than northeast Mexico. In view of the great similarity of A. flava with A. fungicola, its host is likely an Atta species. It could be Atta cephalotes, the only species of Atta, Acromyrmex, and Amoimyrmex so far reported for Belize (according to https://antwiki.org and https://www.antweb.org, both accessed on 19.i.2021), although Acromyrmex echinatior is known from all neighbouring countries (https://www.antweb.org).

Remarks.
In the description of A. flava Gurney (1937) only noted one difference to A. fungicola, the very short subgenital plate (his fig. 9). But the subgenital plate of the type specimen is damaged and missing its apical part (Figs 25C, arrow in 26A); it might have been of the same length and shape as in A. fungicola (Fig. 26B). In view of the weak differences between the males of A. flava and A. fungicola one might have doubts whether the type specimen of A. flava really represents a separate species. But as long as neither the corresponding female nor the full shape of the subgenital plate is known, synonymisation with A. fungicola appears unjustified. Well characterized by the combined occurrence of two characters: T2-5 with dispersed surface bristles, T6,7 with only few and small surface bristles. The latter feature is also shared by A. paucisetosa, in which, however, the surface bristles of T2-5 are arranged in one line.

Attaphila fungicola
Description. Size: Length of body (dried): male 2.65-3.5 mm, female 2.45-3.5 mm (after Hebard 1916). Surface bristles of tergites 2-5 dispersed, not arranged in transversal rows (Fig. 8A, C). Transversal ridges tr2-5 without distinct small excurvations to the anterior (Fig. 8A, C; compare grey arrows in Fig. 11A), but male tr2 posteriorly of the specialisations with a wide excurvation to the posterior, mesally followed by a wide, very shallow excurvation to the anterior (grey arrows in Fig. 8A). Male: Tegmina (Fig. 3G, H) widest at about 1/2 of length; obtusely wedge-shaped due to the converging course of the basalmost part of the posterior border and the apical border, connecting curvature shorter than in A. flava thanks to the slightly more oblique course of the borders; likewise, posterior border near the tegmen base less concave, oblique apical border fairly straight; surface bristles rather fine (stronger than in A. flava). Hindwings fairly rhombic, with obtuse apex. Glandular pores on T2-5 in the area between the transversal ridge and the anterior border, dispersed, in moderately high density (Fig.  5G, H). Tergite 1 with long bristles on surface and borders (like T2-5); without specialisations. Tergite 2 along the anterior border with a pair of specialisations (msl2) consisting of a shallow, narrow transversal trough the bottom of which is patterned by low crossing ridges (Fig.   5G, H). Tergites 6,7: (Figs 8A, 13F, 15B) Median lobe of T7 scarcely visible; transversal ridge tr6 well developed, tr7 absent; posterior border of T6 and T7 with a relatively dense row of very short and thin bristles, much smaller than those of the respective lateral borders; surface of T6 and T7 only with few isolated and very small bristles, still smaller than those of the posterior borders. Subgenital lobe: (Figs 25D, 26B) distal part with a deep excavation each along left side and right side; lobe posterior to level of excavations narrowly tongue-shaped and inclined leftward; only left stylus present (sl l ), which is conical, inserted at base of left excavation, not reaching tip of lobe; at the base of the right excavation with a group of short and strong bristles; distal lobe and stylus with few rather long and thin bristles. Phallomeres: (Fig. 25D, E, 26B) Sclerotised part of hook (h) from the short, wide base (b) almost gradually narrowing (not as gradually as in A. flava, but with a weak, yet distinct shoulder, Fig. 25C) into a slender neck (n) with a hardly curved proximal part, terminating in a slightly wider claw part (cl). Endophallic apodeme (ea) strongly narrowed at base (forking site of sclerite). Relative to the axis of the endophallic apodeme (ea), the virga (vi) shows a weak, very shallow sinusoidal curvature to the left, its apical part being hardly curved (not fully back into the ea-axis) and gradually narrowed to a rather acute tip, distinctly more acute than in A. paucisetosa; virga likely longitudinally grooved. Paraprocts: Both lacking a sclerotised projection (Fig. 8B).
Female: Tergites 6,7: (Figs 12C, 14C) Median lobe of T7 rather long; transversal ridges tr6 and tr7 complete, tr6 sublaterally at most with a very weak bend; surface bristles numerous, very few of medium size, most between very small and tiny; dispersed all over the surface between transversal ridge and posterior border. Subgenital plate (Figs 16C, D, 18E, F) rounded-rectangular, with parallel lateral borders; lateral parts of transversal ridge (sr7-l) fairly straight; median part (sr7-m) with gap(s) of various size and number: two cases with one rather wide gap, and one case with two quite narrow gaps, then indicated to be slightly bisinuate. Genitalia: Spermathecal plate (sp) moderately large, pouch gcp present (size not determinable; Fig. 19C, D). In laterosternal shelf sclerite (Figs 19C, 22E, F) central part (c) fairly short and posteriorly rounded, posterior and lateral margins of central part and arms together forming a quite evenly curved horseshoe arch, arms (a) fairly narrow, wing parts (w) moderately wide, their base restricted to posterior half of tubes (blue arrowhead); tubes (lst) with angular bend exceptionally far anteriorly (at red arrowhead: near midlength of lateral border), from there towards the anterior rather strongly narrowed and curved mesad. Mesal gonangulum sclerites (gg-m) distinct, lateral ones absent (Fig. 19D). (Buckley, 1860). [The current taxonomic status (according to Bolton 2021) is that (1) Atta fervens (Drury, 1782), the name to which the sampling of Attaphila fungicola type specimens in "Material studied" above most likely refers, is a synonym of Atta cephalotes (Linnaeus, 1758), but that (2) the "Atta fervens" populations from Texas, the area of this sampling, were described as a separate species Atta texana (Buckley, 1860), which is a currently valid name.] Distribution. USA: Texas (Austin, Donie, Gause, Seguin), Louisiana (Natchitoches). The reports of Wheeler (1928) from British Guiana and Panama and of Brossut (1976) from Trinidad most likely concern other species.

Remarks.
In his description of the species Wheeler (1900) reported that he had collected four males, two females, and about seventy immature specimens from a nest of "Atta fervens" (i.e. Atta texana) (excavated on the 10 th of April). It is not indicated which of the specimens he considered as type specimens.
Specimens labelled as types of A. fungicola are present in the Collection Wheeler, which is preserved in the American Museum of Natural History (New York). It comprises one male and seven larvae, each labelled with "Austin, Texas, W.M.Wheeler, Coll."; additionally, there is a common handwritten label: "Atta fervens with Attaphila fungicola, Austin, Nov. 20. 1900".
The agreement in the date shows that the specimens from Maastricht undoubtedly belong to the series which Wheeler described in his paper, while the New York series was collected later in the year. But the only specimen among the two series which could serve as an informative type is the sole adult specimen, the male from the New York series. Since both series were collected by Wheeler, in the same year, at the same locality, in nests of the same ant species, it appears legitimate to consider the two series together as a Syntype series, from which the male specimen is here selected as the Lectotype, while all other specimens are designated as Paralectotypes. A. aptera Bolívar, 1905in Bruijning 1959 Description. Size: Length of body (dried): female 2.8 mm. Surface bristles of tergites 2-5 at least in median third of tergites arranged in one fairly regular transversal row (though almost two-rowed on T5), towards laterally distribution less regular, appearing two-rowed (Fig.  10A). Transversal ridges tr2-5 medially and in part sublaterally with a very weak small excurvation to the anterior (grey arrows in Fig. 10A; weaker than in A. schuppi, Fig. 11A).

Male: Unknown.
Female: Tergites 6,7: (Figs 10B, 12D, 14D) Median lobe of T7 rather long; transversal ridges tr6 and tr7 complete, tr6 sublaterally without angular bend; surface bristles numerous on T6, rather few on T7, of medium size (slightly smaller than in A. bergi), strongly focused to central part of surface area. Subgenital plate (Figs 17E, 18G) rounded-rectangular, with parallel lateral borders; lateral parts of transversal ridge (sr7-l) fairly straight; median part (sr7-m) with three small gaps, weakly bisinuate. Genitalia: Spermathecal plate (sp) large, pouch gcp large (Fig. 21A). In laterosternal shelf sclerite (Fig. 22G) central part (c) very long and posteriorly widely rounded, arms (a) moderately wide, wing parts (w) very wide, their base reaching far into anterior half of tubes (blue arrowhead; but interpretation not entirely clear); tubes (lst) with an evenly convex lateral border and a straight mesal border, narrowed towards the anterior. Mesal gonangulum sclerites (gg-m) distinct, lateral ones absent (Fig. 21A).   (Fig. 9A, B, E). Transversal ridges tr2-5 without distinct small excurvations to the anterior (Fig. 9B, E; compare grey arrows in Fig. 11A), but male tr2 posteriorly of the specialisations with a wide excurvation to the posterior, mesally followed by a wide, very shallow excurvation to the anterior (grey arrows in Fig.  9B). Male: Tegmina (Fig. 3I, J) widest at about 1/2 of length; obtusely wedge-shaped due to the roughly con-verging course of the basalmost part of the posterior border and the apical border, connecting curvature similarly short as in A. fungicola; basalmost part of posterior border and the oblique apical border slightly concave; surface bristles rather fine (as in A. flava but longer and at a lower density). Hindwings fairly rhombic, with obtuse apex (Fig. 1H). Glandular pores on T1-5 in the area between the transversal ridge and the anterior border, dispersed, in moderately high density (Fig. 5E, F). Tergite 1 with long bristles on surface and borders (like T2-5); without specialisations. Tergite 2 along the anterior border with a pair of specialisations (msl2) consisting of a shallow, fairly wide transversal trough the bottom of which is patterned by low crossing ridges that are more complicated than in A. flava and A. fungicola, forming a net-like relief (Figs 5E, F, 9B). Tergites 6,7: (Figs 9C, 13E, 15D, E, K(larval)) Median lobe of T7 very short, but distinct; transversal ridge tr6 well developed, tr7 absent; posterior border of T6 and T7 with a row of relatively long and thin bristles, distinctly shorter and thinner than those at the respective lateral borders; surface of T6 and T7 only with few isolated and small bristles, still smaller than those at the posterior borders. Subgenital lobe: (Figs 25A, B, 26C) distal part with a deep excavation each along left side and right side; lobe posterior to level of excavations narrowly tongue-shaped and inclined leftward; only left stylus present (sl l ), which is conical, inserted at base of excavation, not reaching tip of lobe; at the base of the right excavation with a group of short and strong bristles; distal lobe and stylus with few rather long and thin bristles. Phallomeres: (Figs 25A, B, 26C) Sclerotised part of hook (h) from the short, wide base (b) suddenly narrowing into a slender neck (n) widely and uniformly curved from the beginning, terminating in a slightly wider claw part (cl). Endophallic apodeme (ea) not narrowed at base (forking site of sclerite). Relative to the axis of the endophallic apodeme (ea), the virga (vi) shows a weak, angular proximal bend to the left, its apical part being hardly curved (not fully back into the ea-axis) and gradually narrowed to a fairly stout tip; virga likely longitudinally grooved. Paraprocts: Both lacking a sclerotised projection (Figs 5K, 9D).
Female: Tergites 6,7: (Figs 9F, 12E, 14E, 15L(larval)) Median lobe of T7 rather long; transversal ridges tr6 and tr7 complete, tr6 sublaterally with a weak, but distinct bend; surface bristles very few, of medium size or smaller; focused to central part of surface area. Subgenital plate (Figs 16E, F, 18H, I) rounded-rectangular, with parallel lateral borders; lateral parts of transversal ridge (sr7-l) with a weak mesally directed curvation, lateral terminal parts with a weak laterally directed curvation; ridge mesally ending well after having reached a transversal orientation, close to a bristle-bearing point upon it, with a moderately wide median gap, recurved sr7-m ends indicating the ridge to be bisinuate. Genitalia: (Figs 20A, B, 22H) Spermathecal plate sp small, pouch gcp fairly small (Fig. 20A, B). In laterosternal shelf sclerite (Figs 20A, 22H) central part (c) fairly long and posteriorly rounded, posterior and lateral margins of central part and arms together forming a quite evenly curved horseshoe arch, arms (a) fairly wide, wing parts (w) fairly narrow, their base restricted to posterior half of tubes (blue arrowhead); tubes (lst) narrowed towards the anterior and curved mesad. Mesal gonangulum sclerites (gg-m) distinct, lateral ones absent (Fig. 20B)

Diagnosis. Female:
Characterised by a series of unique features: Transversal ridge of T2-5 mesally and laterally with a small but distinct anterior excurvation (much weaker present also in A. multisetosa), transversal ridge absent on T7, cerci longer than wide.
Distribution. Brazil: Est. Rio Grande do Sul, only known from the type locality Porto Allegre.

Remarks. The Wasmann Collection in Maastricht keeps
two female specimens (on one pin) labelled by Wasmann as follows: "Attaphila schuppi (m) Boliv., Typen"; there are no labels concerning locality and species of the ant host. Bolívar's description contains, after a short morphological characterisation, the following data: "♂ Long. 3,5 mill. Hab. Porto Alegre. Elle se trouve en compagnie de Atta nigra Schupp. ...". The discrepancy between the two data sets raises the question whether the females from Maastricht had really been the subjects of Bolívar's description.
The absence of a number ahead of the sex symbol does not necessarily mean that Bolívar had only one specimen for study; in the descriptions of some other new species in the same paper Bolívar never noted the number of treated specimens. The strongest doubts in considering the Maastricht specimens as type specimens of A. schuppi concern the sex determination. It is extremely unlikely that Bolívar should have confused the two sexes. In the description of A. aptera in the same paper Bolívar emphasises the exceptional case of that species having wingless males (a wrong assumption, as a larval male is concerned, see 4.1.). On the other hand, it appears unlikely that Bolívar had males in his hands when he described the species A. schuppi. The description does not contain any remarks concerning wings, and the posterior border of the last sternite is described as being "transverso trisinuato", as is typical for the subgenital plate of Attaphila females. The simplest solution for the conflicting pieces of information would be to assume an error in the printing of the sex symbol.
The last remaining issue is the incomplete labelling of the type specimens. Wasmann had got the specimens from R.P. Schupp, possibly already without a label and only with a verbal information about the collecting data, which he might have passed on to Bolívar. After getting back the specimens he might have forgotten to label them accordingly. In spite of the dubious circumstances, the authors are convinced that the Maastricht specimens represent the type specimens of A. schuppi.
A.B. Gurney had labelled one of the specimens as lectotype: "Top specimen (mature ♀) designated lectoholotype schuppi. det. A.B.Gurney 1971". In fact, both specimens are mature females, and since the designation was not published, it is ignored. Bolívar, 1905

Diagnosis. Female:
Characterised by the unique shape of S7: posterior parts of the lateral borders anteriorly converging, in all other species (more or less) parallel.
Male: Unknown. Female: Tergites 6,7: (Figs 11D, 13A, 14G) Median lobe of T7 rather long; transversal ridges tr6 and tr7 complete, tr6 sublaterally with a weak, but distinct bend; surface bristles very numerous on T6, only few on T7, small (slightly smaller than the larger ones in A. paucisetosa), focused to central part of surface area. Subgenital plate (Figs 17F, 18L) semicircular, lateral borders distinctly converging to the anterior; lateral parts of transversal ridge (sr7-l) fairly straight, ridge mesally ending well after having reached a transversal orientation, with a fairly narrow median gap (end parts of ridge only slightly more developed than in A. aptera, but lateral parts more strongly inclined mesally, thus leaving a narrower gap), hardly recurved sr7-m ends indicating the ridge to be at most weakly bisinuate. Genitalia: (Figs 21C, 22I) Spermathecal plate sp and pouch gcp not clearly identifiable. In laterosternal shelf sclerite (Fig. 22I) central part (c) moderately long and posteriorly widely truncate (slightly rounded), arms (a) moderately wide, wing parts (w) moderately wide, their base restricted to posterior half of tubes; tubes (lst) with a straight mesal border and slightly narrowed towards the anterior, anteriorly more or less transversally cut. Mesal gonangulum (gg-m) sclerites distinct (presence of lateral ones questionable; Fig. 21C).

Male: Unknown.
Female: Tergites 6,7: (Figs 10D, E, 13B, 14H) Median lobe of T7 rather long; transversal ridges tr6 and tr7 complete, tr6 sublaterally with a weak, but distinct bend; surface bristles very numerous on T6, only few on T7, very small, focused to central part of surface area. Subgenital plate (Figs 17A, B, 18M, N) rounded-rectangular, with parallel lateral borders; lateral parts of transversal ridge (sr7-l) with a strong mesally directed curvation, lateral terminal parts with a distinct laterally directed curvation; at least in part of the cases ridge mesally ending after having reached a transversal orientation, with a fairly wide median gap, partly recurved sr7-m ends indicating the ridge to be bisinuate (course of the transveral ridge very similar as in A. aptera, but lateral parts more strongly inclined mesally, thus leaving a narrower gap). Genitalia: (Figs 21B, 22K, L) Spermathecal plate sp large, pouch gcp quite large (Fig. 21B). In laterosternal shelf sclerite (Fig. 22K, L) central part (c) moderately long and posteriorly widely rounded-truncate, arms (a) moderately wide, wing parts (w) moderately wide, their base restricted to posterior half of tubes; tubes (lst) with a straight mesal border, slightly narrowed towards the anterior, anteriorly more or less transversally cut. Mesal gonangulum sclerites (gg-m) distinct, lateral ones absent (Fig. 21B).

Distribution.
Brazil: Est. São Paulo (the possible localities "Baxnery" and "Hinanga" indicated on the labels could not be identified).

Key for females mainly via structure of S7
Attaphila fungicola shows an unusual high variability in the structure of the median part of the sternal transversal ridge (sr7 in Fig. 18E, F) and is, therefore, not included in the key. Applying the key to its specimens would lead to several places following slot 2'. The females of A. fungicola are otherwise well characterised by the mostly tiny bristles distributed all over the surface of T6. -Note that features of the anteromedian part of the transversal ridge (sr7) should be examined at high contrast (as, e.g., in Fig. 18G compared to Fig. 17E).  (Fig. 17A, B), gap between their endings narrower (Fig.  18M, N), lateral parts posteriorly of the mesal curvation with a distinct and uniform lateral curvation (Fig. 17A

Key for males
The key has to be used with care since adult males are only known from 5 of the 9 species described: Attaphila paucisetosa, A. fungicola, A. flava, A. aptera, and A. bergi.
1 Subgenital lobe excavated only on left side, with two styli, a well-developed left one and a very small right one (Fig. 24A, C); T1 without long bristles on surface and borders, but with a median specialisation (Fig. 5A-D) having in one species two tufts of medium-sized bristles (Fig. 5A, B); T2 without specialisations; T6,7 along posterior border with or without bristles; tegmina with transversal apical border (Fig. 3A-D 2 Surface bristles of T2-5 arranged strictly in one transversal line; bristles along posterior border of T6,7 relatively strong, almost of the strength of those on the lateral borders (Fig. 13E, 15D, E) (Fig. 15B, C) (Fig. 3G, H); endophallic apodeme near the forking site of the sclerite rather strongly narrowed, narrower than the virga at its widest part (Fig. 25D) (Fig. 3E, F); endophallic apodeme near the forking site of the sclerite scarcely narrowed, about as wide as the virga at its widest part (Fig. 25C)  immediately posterior to ridge tr1, no microreticulation involved (Fig. 5A, B); T6,7 along posterior border without bristles (Figs 13C, 14I); virga of left phallomere with a weak sinusoidal excurvation terminating in a long, weakly curved apical part with a relatively stout tip (Fig. 24A, B)  the level of the medially obsolete tr1, no tufts of bristles involved (Fig. 5C, D); T6,7 along posterior border with rather long bristles (Figs 13D, 15A); virga of left phallomere with a strong sinusoidal excurvation terminating in a short, almost rectangularly bent (and thus hook-like) apical part with a relatively fine tip (Fig. 24D, F) .....A. bergi

Biology of Attaphila
Attaphila cockroaches live in colonies of leaf-cutting ants of all three genera: Atta, Acromyrmex, and Amoimyrmex (see 4.1.-4.9.; Table 2), which are -as far as species have been sampled -all monophyletic and show the relationships (Atta + Acromyrmex) + Amoimyrmex (Cristiano et al. 2020; Fig. 27A). The ants are directly or indirectly involved in most aspects of the life history of Attaphila. Leaf-cutting ants collect leaves to farm an obligately mutualistic fungus, the polyploid Leucoagaricus gongylophorus (Möller) Singer, 1986 (Agaricaceae; alternatively assigned to genus Leucocoprinus; www. indexfungorum.org), which is their main source of nutrition (Schultz and Brady 2008;Branstetter et al. 2017). The fungus garden is an overall sponge-like formation with numerous tunnels and crevices. Leaf-cutting ants are distributed across the Americas, from the southern USA down to Uruguay and Argentina (with a concentration in the southern subtropics: Mueller et al. 2017); the same geographical range is true for Attaphila (Fig. 27B, Table 2), although with much more sporadic records. While some of the leaf-cutting ant species are well-studied (such as Atta texana, Atta cephalotes, and Atta sexdens as well as Acromyrmex echinatior, Acromyrmex octospinosus, and Acromyrmex lundii), the knowledge on others is variously extensive.

Fragmentary data and resulting problems
Data on the biology of Attaphila cockroaches and on the symbiosis with their host ants are quite fragmentary, although with very few aspects studied quite intensely in selected species (see below). In the attempt to combine the available data into a more coherent picture, there are three major problems: (1) Due to the hidden life within the ant nests, in situ studies on Attaphila biology inside the nests are difficult and therefore quite rare. Observations on Attaphila cockroaches outside the ant nests may partly concern typical behaviours (related to, for instance, dispersal), but may also concern untypical cases of emergency (for instance, after a destruction of the home colony). And results from studies in the laboratory may include to an unknown extent artifacts in some aspects of biology.
(2) In view of the species diversity of both Attaphila cockroaches and their host ants, of the biological diversity of the host ants (e.g. regarding nest size and plants used for fungus cultures, see below), and of the wide distribution spanning different climate zones, some life history traits could well be quite different among the species of Attaphila. The observations on individual species reported below can thus not be generalized to all Attaphila species.
(3) The 9 species of Attaphila recognised herein have been found in colonies of only 10 species of host ants (Table 2; mainly the abovementioned well-studied species) out of ca. 78 extant species of leaf-cutting ants (according to https://antwiki.org). The absence of Attaphila records from the vast majority of leaf-cutting ant species may suggest highly incomplete sampling.
These issues should be kept in mind in the following.

Association with ants and host specificity
Attaphila are only known from nests of leaf-cutting ants (Atta, Acromyrmex, Amoimyrmex), with one questionable exception, an undetermined Attaphila individual briefly spotted in the nest of an undetermined Trachymyrmex species 2 (VN personal observation). It is noteworthy that Attaphila individuals were also observed to follow trails of Trachymyrmex (see 6.5.). While leaf-cutting ants farm an obligately symbiotic fungus that is not able to live without the ants, and provide the fungus almost exclusively with fresh plant material, Trachymyrmex and all other non-leaf-cutting Attini ("lower attines") primarily use detritus (de Fine Licht and Boomsma 2010) to farm an array of different fungi that can also live without their host ants (Schultz and Brady 2008;Branstetter et al. 2017). Leaf-cutting ants typically also have larger bodies and live in larger colonies than the lower attines. Either of these three factors might be responsible for Attaphila being rare or absent in the lower attines. For Attaphila we found records of co-occurrence with only 10 of the 78 valid species of leaf-cutting ants (Atta 20, Acromyrmex 55, and Amoimyrmex 3 according to https:// antwiki.org). Most leaf-cutting ant species for which no association with Attaphila has been reported had already been formally described (nearly all before 1910) at the time when the labels indicating host ants were produced for collected Attaphila specimens examined herein. This means that the set of reported Attaphila host ants is unlikely to be artificially small because relevant species had not yet been described when the Attaphila were labelled. In addition, many relevant determinations of the ants were conducted (in case of Attaphila and their ants collected by VN or JRG) or tested (in case of determined ants pinned together with formerly collected Attaphila) by ourselves based on literature altogether reflecting up-to-date species-level taxonomy (Santschi 1925;Gonçalves 1961;Borgmeier 1951;Schultz et al. 1998).
The few host records of Attaphila are distributed over the entire leaf-cutting ant phylogeny ( Fig. 27A; Cristiano et al. 2020;Bacci Jr. et al. 2009): Atta sexdens (host ant of Attaphila sexdentis), Atta texana (host ant of Attaphila fungicola), and the species pair Atta cephalotes and Atta colombica (host ants of Attaphila paucisetosa) are representatives of the three principal lineages within Atta, i.e. they are phylogenetically as disjunct as possible within the genus. Within the genus Acromyrmex, Acr. octospinosus and Acr. echinatior (host ants of Attaphila aptera) are in a different main clade than Acr. lundii (host ant of Attaphila bergi) and Acr. niger (host ant of Attaphila schuppi), and Acr. lundii and Acr. niger are also not very closely related. This pattern may suggest that Attaphila cockroaches inhabit the nests of far more leaf-cutting ant species than we know of so far. If a targeted search of Attaphila in the nests of a variety of leaf-cutting ant species is successful, it would either reveal additional Attaphila species or wider host ranges (see below) of the species already known. If, in contrast, no Attaphila specimens are found in association with the many further leaf-cutting ant species, the limitation of Attaphila to few disjunct subclades in the leaf-cutting ant clade will pose an interesting biological question. One case in view of this question may be the strictly grass-cutting ants -some species of Atta (within the Epiatta clade) and Acromyrmex that forage grass instead of dicot leaves and flowers, in particular in the grasslands of southern South America (Bacci Jr. et al. 2009;De Fine Licht and Boomsma 2010;Mueller et al. 2017). For these, Attaphila has not yet been recorded. Acromyrmex lobicornis and likely Amoimyrmex silvestrii, the hosts of Attaphila bergi(?) var. minor, forage both grass and dicots (Mueller et al. 2017; no data for Amoimyrmex silvestrii, but the most closely related Amoimyrmex striatus, Fig.  27A, does forage grass and dicots). Whether the absence of Attaphila records from strictly grass-cutting species has biological reasons or is due to limitations in the sampling of these ant species remains open.
Regarding the degree of host specificity, the data available for associations between species of Attaphila and their host ants (Table 2; Fig. 27A) only allow for very limited conclusions. For three of the nine Attaphila species, no specific host ant species have been recorded so far (A. multisetosa, A. sinuosocarinata, A. flava). Two further species have only been recorded once (A. sexdentis, A. schuppi), so that it is not surprising that also only one host species is known. One species, A. fungicola, has been recorded many times and consistently in association with a single ant species, Atta texana; however, there is Table 2. Geographical distribution of Attaphila species and their host ants (from north to south). Different ant genera in different colours. 2 nd column gives the number of collecting occasions from which a species was recorded, separately for different ant species (compare "material" and "host species" paragraphs in species descriptions chapter 4., data from literature added). -Abbreviations: A. = Attaphila; Acr. = Acromyrmex; Amoi. = Amoimyrmex. Three further species of Attaphila have been recorded on several occasions and in association with more than one species of Attini: (1) A. paucisetosa with Atta cephalotes and Atta colombica; (2) A. aptera with Acromyrmex octospinosus and Acromyrmex echinatior; (3) A. bergi with Acromyrmex lundii and, if the hosts reported for its "var. minor" are considered, also with Acromyrmex lobicornis and Amoimyrmex silvestrii, i.e. across a wide phylogenetic range (Fig. 27A). Case (3), however, is obscure because specimens classified as "var. minor" (all probably larvae) could not be examined in our study, whereby both the conspecifity of the various var. minor specimens (those found with Acromyrmex lobicornis and those found with Amoimyrmex silvestrii) and their assignment to A. bergi remain questionable (see 4.2.). Cases (1) of A. paucisetosa and (2) of A. aptera are thus the only ones demonstrating that host specificity of Attaphila is not necessarily limited to a single ant species. Notably, in both cases the host ants are closely related: Atta cephalotes with Atta colombica, and Acromyrmex echinatior with Acromyrmex octospinosus (Fig. 27A; Sumner et al. 2004;Bacci et al. 2009;Cristiano et al. 2020).

Attaphila species No. localities Distribution of Attaphila species Species of host ants Distribution of host ants
This leads to the current picture that Attaphila species are likely limited to single ant species or to groups of closely related ant species (far below the level of the respective ant genera). With the sparse sampling that is currently available, however, other possibilities cannot be excluded: The closely related species might also share relevant ecological traits, and other, phylogenetically disjunct leaf-cutting ant species with a similar ecological profile might be as useful as hosts for the same Attaphila species. Or, the closely related species might just be the only ones of a larger ant clade (e.g. of a clade classified as a genus) that are available in the distribution area of the Attaphila species concerned, while in other regions the same Attaphila species might (or would) have a wider host range (e.g. at genus-level). Furthermore, the degree of host specificity may vary strongly among the various Attaphila species. We also note that there appears to be some cryptic genetic variation in leaf-cutting ants (Kooji et al. 2018) that in the future might lead to the splitting of species and to an increased species number in leaf-cutting ants. This could also influence our view on the degree of species-specificity of the Attaphila-ant associations.
Host specificity at least at the level of ant genera is, with regard to the mentioned species pairs of Atta and Acromyrmex, especially convincing in the case of the locality Gamboa (Panama). There, all four ant species live in sympatry, and the nests of Atta colombica and two species of Acromyrmex (Acr. octospinosus, Acr. echinatior) occur only few meters from each other (VN personal observations). Despite the close proximity of the nests of all three ant species, A. aptera was never found in the nests of the Atta species, and A. paucisetosa never in those of the Acromyrmex species. On a larger scale, fungicola-group cockroaches have only been found in colonies of Atta ants, and bergi-group cockroaches seem to be restricted to Acromyrmex and Amoimyrmex (Fig. 27A). This may reflect the striking ecological differences between the two ant groups: Atta colonies can reach a size of a house and dominate their ecosystems with their long foraging trails and by defoliating the immediate surroundings of their nests, while Acromyrmex and Amoimyrmex nests are rarely larger than a basketball and rather inconspicuous. On the other hand, experiments under laboratory conditions showed that the cockroaches can survive at least for a short time in colonies of non-host leaf-cutting ants (Moser 1964;Nehring et al. 2016). So far, no specific life-history differences (in e.g. diet, life cycle, or dispersal) among Attaphila species or potential specific adaptations to host ants of a specific clade (or species), or a specific ecological profile have been described. Wheeler (1900) initially believed Attaphila cockroaches feed on the fungus garden just like their host ants. He concluded this from gut dissections, which yielded a whitish substance that he interpreted as masticated remains of the mycelium (remains of the chitinous hyphal walls are not reported). Attaphila individuals were also observed to manipulate fungus fragments with their mouthparts (Nehring et al. 2016), suggesting the fungus to be at least part of their diet. However, later Wheeler (1910) proposed that cockroaches may lick lipids off the ant cuticle when riding on them (see 6.4.). We submit that this source alone could hardly explain the abovementioned gut contents, and it might appear as too meagre to sufficiently nourish the cockroaches -both regarding the amount and the biochemical diversity of what could be licked from an ant's surface.

Interaction with host ants in the nest
Attaphila cockroaches have frequently been reported to be found deeply inside the nests of their host ants, mainly in the fungal chambers (e.g. Wheeler 1900;Brossut 1976;Waller and Moser 1990;Nehring et al. 2016). Their small compound eyes (relative to those of other cockroaches) may suggest that the cockroaches spend most of their life in the darkness inside the nest (Wheeler 1900) and that they rarely leave this well-protected habitat -although it is hard to estimate the amount of life-time they spend outside the nest (see 6.5.), and the number of leaving events. Attaphila cockroaches are known to ride on workers within the ant nest (A. fungicola: Wheeler 1900, Phillips et al 2017A. paucisetosa and A. aptera: Nehring et al. 2016;Fig. 28E; observations mostly made in cultures). This behaviour, enabled by presumably strong attachment abilities via well-developed pretarsal arolia (Brossut 1976), triggered the idea that cockroaches feed on the ants' cuticular lipids (see 6.3.), and it also serves the in-trinsic dispersal, i.e. between fungus chambers within the same nest (Phillips 2021). An ant worker's back or head may also be a rather safe spot for a cockroach that is always under threat to be killed by its hosts. The cockroaches generally smell like their host colony, probably because they acquire host-specific substances from the ants and/or fungus garden (Nehring et al. 2016), but a genetic disposition to the odour of a specific host species may also be one aspect of the host specialization of the cockroaches. In any case, the cockroaches are still sometimes attacked by their own host colony's workers, at least when isolated in laboratory set-ups, which may cause stress to the ant workers (Nehring et al. 2016). Tightly clamping onto an ant might allow the cockroach to better blend in with its surroundings and be less of a suspicious particle.
When not actively attached to them, the cockroaches appear to avoid contact with ant workers as much as possible. The cockroaches flee when touched by ants and otherwise hide in the fungus garden with its multiply folded surface providing many crevices (Nehring et al. 2016).

Extrinsic dispersal
Attaphila cockroaches have to leave the ant nest at least for their extrinsic dispersal to other ant colonies, which could either be already existing ones or newly founded ones. There are basically two ways to reach another colony: the cockroach could either join the ants in their dispersal activities (vertical transmission; e.g. by phoresis during mating flights); or it could conduct its own activities independent of the ants (horizontal transmission; e.g. by leaving its natal nest and searching for another).
Females and -less commonly -larvae (and in a single reported case a male: Phillips et al. 2017) of Attaphila fungicola (Moser 1967) as well as females of Attaphila paucisetosa (see 4.6. "Material") have been seen attached to swarming virgin ant queens that were about to found new colonies. Attachment to alates has additionally been reported for Attaphila bergi (Bolivar 1901). Female A. fungicola that had experimentally been separated from the virgin ant queens prior to their mating flight produced oothecae within a few days (Waller and Moser 1990), indicating that they were mature and presumably also inseminated, so that they would have been able to populate the newly founded host colony. Attaphila fungicola females have indeed been found in newly established colonies (Moser 1967). This all is in line with a vertical transmission system where inseminated cockroach females disperse with host ant alate females to establish new populations in newly founded ant colonies. If vertical transmission were the major or only dispersal mechanism, all cockroaches in an Atta colony would be expected to be the offspring of one or few cockroach females that were transported by the colony's queen.
In contrast, in studies on Attaphila paucisetosa and its host Atta cephalotes in Colombia (Rodríguez et al. 2013;JRG unpublished observations), Attaphila specimens were only found in nests older than two years and larger than 30 m 2 . Their absence from newly founded ant nests indicates vertical transmission to be either uncommon or not very effective. Observations by Phillips et al. (2017) that Attaphila fungicola females indeed do not survive well in newly founded Atta nests corroborate this.
The latter cases suggest that horizontal transmission is also (or even more) important. One prerequisite for this seems to be present since Attaphila fungicola can follow ant pheromone traces in the laboratory (Moser 1964) and generally track ants (Sánchez-Peña 2005), and Attaphila schuppi has been found on ant foraging trails in the field (Bolívar 1905). There seems to be little specificity of trail following behaviour since Attaphila fungicola cannot only follow the trails of its host Atta texana, but also those of Trachymyrmex ants (Moser 1964). However, trail following alone would not be sufficient for dispersal because the trails of different Atta nests are unlikely to be connected.
Phillips (2021) suggests a combination of extrinsic dispersal via swarming queens and via ant trails: He observed Attaphila fungicola females to dismount the Atta texana queens after the mating flight and to search for ant trails instead of remaining with the queen. Once on a trail -most likely one of a foreign colony -the cockroaches would not walk to the nest themselves, but mount foraging ant workers, or even leaf fragments carried by the ants, as vehicles. Such a two-step dispersal makes use of long-range dispersal via swarming queens but avoids the problem that a high rate of foundress nests will fail, and is in line with all observations above. Riding into a new colony on the back of a worker may be a way for the cockroaches to avoid their hosts' nestmate recognition system (see 6.4.). Ants recognize intruders by their smell, and in laboratory experiments leaf-cutting ant workers indeed attacked and killed Attaphila paucisetosa and A. aptera originating from other colonies than their own (Nehring et al. 2016). However, being carried by a nestmate worker that is carrying food to the nest might allow the cockroaches to "fly" under the radar and avoid detection.

Life cycle
Few details of the Attaphila life cycles are known, mostly from Attaphila fungicola in Louisiana, where observations indicate that the Attaphila life cycle is linked to that of the host ant: Waller and Moser (1990) report that the ratio of mature females to larvae in an ant nest is much lower after the mating flight than before, indicating that many mature females have left the nest. It thus appears plausible that there is a gradual maturation of the Attaphila population in a nest throughout the year; during the swarming of the ants, inseminated mature Attaphila females can disperse with virgin ant queens (see 6.5.); in their new host colonies, Attaphila females then produce oothecae, and larvae hatch, which develop into adults before the next ant mating flight in the following year. Then, another cycle begins with the appearance of small larvae. Females can be collected from the colonies throughout the year and can live for longer than one year in laboratory colonies (Waller and Moser 1990), suggesting that they can go through more than one reproductive cycle.
While both males and females have been collected from Atta texana colonies in Texas, only females have been reported from Louisiana (Waller and Moser 1990). It is unclear whether the lack of males is due to incomplete sampling or due to a potential local evolution of parthenogenesis.

Characters usable for species identification
The species of Attaphila are in both sexes provided with a series of interspecifically variable characters allowing in most cases a clear identification (summarised in Table 3).
In addition to the sex-specific characters listed below there is one which is identically expressed in both sexes: the arrangement of the surface bristles on abdominal tergites T2-5. Important male characters are shape characteristics of the tegmina including the orientation of the apical border; the shape of the hindwings; the presence of long bristles on T1, the structure and position of tergite specialisations; the size and arrangement of bristles along the posterior border and on the surface of T6,7; the development of the transversal ridge of T7; the presence of a hook on the right paraproct; and the structure of the subgenital lobe (with one or two styli, with a lateral excavation on one or on both sides) and the phallomeres (curvation of virga, shape of hook). The variability in the latter two body parts is, at least within the two species groups (see below), astonishingly low; A. flava, A. fungicola, and A. paucisetosa are according to their male genital characters almost indistinguishable (Figs 25A, C, D, 26A-C).
In the females distinguishing features can be found in the size and arrangement of the surface bristles of T6,7; in the development of the transversal ridge of T7; and in the features of the subgenital plate (S7 shape and (dis) continuity of transversal ridge) and of the genitalia (shape characteristics of laterosternal shelf area, gonangulum sclerites, spermathecal plate). In the latter, the laterosternal shelf area is most important, showing the highest variability; the females of the eight species with known females are all well characterised by specific details of this area (Fig. 22A-L). This is a rather unusual situation for Blattodea, which contain many genera (like the ectobiids Ectobius and Phyllodromica) in which species determination of females via morphology is extremely difficult or even impossible. Nevertheless, a similar case as in Table 3. Characters of Attaphila species and grouping of species. -Abbreviations and colours: ♂, ♀ in 1 st column indicating whether a character is relevant to male or female sex or both. S + number = sternite, T + number = tergite, ?? = unknown. Entries "type 1" and "type 2" for laterosternal shelf area mark species pairs with great similarity in this area (for details see species descriptions). Colours mark putative species groups: orange = bergi group, blue = fungicola group, both pale if assignment poorly supported, green = not assigned to a group. num. = numerous, med. = medium. Attaphila is also found in the blattellid genus Loboptera (Bohn 1991), where the variable structures of the female genitalia, including also the laterosternal shelf area, allow an unequivocal determination of almost all species.

Interspecific relationships in Attaphila
For most of the characters that distinguish Attaphila species (see 7.1.), outgroup comparison with other blaberoid taxa is problematic for a variety of reasons (often in combination): either the elements concerned are likely unique to Attaphila (e.g. tubes of laterosternal shelf); or they show a unique condition (middle part of laterosternal shelf sclerite); or data on other blaberoids are insufficient (concerning structural detail or the number of taxa studied). In other cases outgroup comparison is conceivable, but conflicting (e.g. gonangulum sclerites); homoplasy can occur to a considerable extent. Relationships in Attaphila can thus to a large extent only be discussed without indications on character polarity, or based on polarity hypotheses derived from the specific kind of structural differences (e.g. conditions with stronger reduction, asymmetry, or segmental differences as putative apomorphies). According to male characters (see Table 3), A. aptera, A. bergi, A. flava, A. fungicola, and A. paucisetosa (the species with males known) can be sorted into two species groups: the bergi-group, as we may call it, containing A. aptera and A. bergi, and the fungicola-group with A. flava, A. fungicola, and A. paucisetosa (matching colours in Table 3). The bergi-group is characterised by the transversal apical border of the tegmina, the absence of long bristles on T1, the presence of a median specialisation on abdominal T1 (though this is represented by different cuticular structures in the two species), the presence of transversal ridge tr7, a subgenital lobe with an excavation only on the left side and two styli, and the distinct sinusoidal excurvation of the phallomere virga. The fungicola-group is characterised by the oblique apical border of the tegmina, the presence of long bristles on T1 (unknown for A. flava), the presence of lateral specialisations on abdominal T2 (with corresponding cuticular structures in the species), the absence of transversal ridge tr7, a subgenital lobe with an excavation on both sides and only one stylus, and the only weakly curved or bent virga. The differing sets of features are accompanied by a different host specificity: the species of the bergi-group live in nests of Acromyrmex species, those of the fungicola-group in nests of Atta species. The genus specificity in the host selection seems to be very strong, while a comparable species specificity does not seem to exist (see 6.2.).
The idea of a division into two species groups does not get much support by characters of the females. At first glance, the size and arrangement of the surface bristles of T6,7 appear to be in agreement with this grouping. The bristles are numerous and large in the bergi-group, even the largest in the fungicola-group are smaller and they are much less numerous. These differences, however, be-come obsolete when the remaining species -A. multisetosa, A. schuppi, A. sexdentis, and A. sinuosocarinata, i.e. those with only females known -are included in the considerations. The size of the bristles in these females varies strongly from slightly smaller than in the bergi-group to much smaller than the largest in the fungicola-group; a separation into two well defined groups by this character, therefore, is not possible.
Other female characters usable for the elucidation of interspecific relationships concern the laterosternal shelf area with its high interspecific variability. The great similarity in the shape characteristics of the laterosternal shelf area between A. fungicola and A. paucisetosa (Fig. 22E, F, H; represented as "type 2" in Table 3), for example, may well be interpreted as an indication of a close relationship between the two species, confirming their assignment to the same species group. The species A. bergi and A. schuppi represent another pair with very similar laterosternal shelf areas (Fig. 22C, D, J; "type 1" in Table 3) also suggesting a close relationship. The deviating shape characteristics of the laterosternal shelf area in A. aptera (Fig. 22A, B) do not necessarily contradict the suggestion to place the three species together in a bergi species group. The high variability in the shape characteristics of the laterosternal shelf area can be seen as a sign for rapid evolutionary changes in these structures, in contrast to male genital structures (subgenital lobe, phallomeres) showing only small differences within each of the two species groups. Thus, while the male genital structures thanks to their slower evolution might still indicate a close relationship between A. aptera and A. bergi, these indications may no longer be present in the structure of the laterosternal shelf. The suggested assignment of A. schuppi to the bergi-group is also supported by its ant host belonging to Acromyrmex (Acr. niger; Table 2).
Female characters cannot contribute to the clarification of the position of the other three species with unknown males: A. multisetosa, A. sinuosocarinata, and A. sexdentis; neither the laterosternal shelf area nor the subgenital plate allow conclusions on their relationships with other species. However, two of the species, A. multisetosa (with an Atta host ant) and A. sinuosocarinata (with host ants unknown), show similarities in the arrangement of the surface bristles on abdominal T2-5 with A. paucisetosa. The bristles are arranged in a strict line in A. paucisetosa, less strictly in A. sinuosocarinata, with singular bristles being slightly apart; in A. multisetosa bristles arranged in one line are only found in the median third of T2-4. The similarities might be interpreted as signs of close relationships suggesting the assignment of the two species to the fungicola-group. The suggestion would in case of A. multisetosa also get support from its host, a species of the genus Atta. But the proposed assignment remains doubtful for two reasons: first, the respective character, the arrangement of bristles in one line, is not very complex and thus potentially prone to homoplasy; second, since the larvae of species having dispersed bristles in later stages also have bristles in a single line in early stages, it could be a plesiomorphy (though alternatively a paedomorphic apomorphy).
For some of the male characters separating the two species groups, tentative conclusions on their polarity can be made. (1) The presence of a stylus on each side of the male subgenital lobe in the bergi-group would appear plesiomorphic, and the lack of a stylus on the right side as an apomorphy of the fungicola-group, as a pair of styli is part of the basic body-plan of Blattodea. A lack of the right stylus only sporadically occurs in other Blaberoidea (e.g. Roth 1999: fig. 7G). (2) In both groups the male subgenital plate has an excavation on the left side bearing the left stylus; the formation of an additional excavation on the right side in the fungicola-group may be considered as apomorphic in comparison with the bergi-group, as such an excavation only sporadically occurs in other, likely phylogenetically remote blaberoid taxa (e.g. Bohn 2019: fig. 19K). However, polarity within Attaphila is a bit doubtful, because it is unknown from which position the right stylus was lost in the fungicola-group: either from a proximal position comparable to the left stylus of the bergi-group (the distal shift of the right stylus then being an apomorphy of the bergi-group, and the presence of an excavation on both sides possibly representing a plesiomorphic symmetrical condition); or from a distally shifted position as the right stylus of the bergi-group (the distal shift of the right stylus then being a groundplan feature of Attaphila, and excavations of the two sides not representing a symmetrical condition, the right one being an independent apomorphy). (3) The absence of male tr7 might be an apomorphy of the fungicola-group, as it constitutes a difference between segments (male tr2-6 are in all species well developed). (4) The transversally cut tegmina of the bergi-group may be considered as more plesiomorphic than the obliquely cut tegmina of the fungicola-group -if the latter can reasonably be considered as including a further advanced reduction of the posterior part of the tegmen. (5) The lack of long bristles on male T1 might be an apomorphy of the bergi-group, as it constitutes a difference between segments (all Attaphila males have long bristles on T2-5). Characters (1)-(4) tentatively support the Atta-associated fungicola-group as monophyletic. This may then additionally be supported by the shared specialisations on male tergite T2 (for which outgroup comparison is not conclusive, see 7.3.3.). On the other hand, only one character (5) suggests the monophyly of the Acromyrmex-associated bergi-group.
Paraphyly of the bergi-group is more strongly supported than its monophyly by the retention of three putative plesiomorphies only in A. aptera but not in A. bergi (and other Attaphila species): the presence of the lateral part of the gonangulum (gg-l in Fig. 19A, clearly a plesiomorphy by outgroup comparison, see 7.4.2. -although with some instances of homoplasy); the well-developed male tr7 (see character (3) above; only weakly developed in A. bergi); and the presence of a hook on the right paraproct. Paraproctal hooks are ubiquitous in Blaberoidea (except for Pseudophyllodromiidae) and most likely an autapomorphy (under exclusion of Pseudophyllodromiidae if this is the sister group of the remaining Blaberoidea); its presence in A. aptera may represent a unique plesiomorphy within Attaphila (though only with regard to species with known male sex). In this case the aberrant laterosternal shelf of A. aptera (see above in 7.2.) could rather be seen as a further indication of this species being an early offshoot. On the other hand, the fully continuous condition of the transversal ridge on the female subgenital plate only in A. bergi (sr7 in Fig. 16A, B) is possibly a plesiomorphic condition suggesting this species to be the earlier offshoot; yet, both continuous and interrupted sr7 ridges occur in various other blaberoid genera, indicating a high degree of homoplasy for this character. As a third alternative, A. schuppi is supported as the basalmost offshoot within Attaphila by the probable lack of the genital chamber pouch (gcp). This structure has not been reported from other Blaberoidea (but may have been overlooked) and may thus appear as an autapomorphy of Attaphila excluding A. schuppi.
The last remaining species, A. sexdentis (only known from the female holotype), differs from all other species by the semicircular female subgenital plate S7 (Figs 17F, 18L, Table 3), which is based on the throughout rounded-converging course of the lateral plus anterior borders in short distance to the transversal ridge sr7. This is another character for which outgroup comparison is difficult. The first reason is conflicting outgroup comparison, as in other blaberoids the lateral borders of S7 variously diverge to the anterior, are parallel, or converge to the anterior (red lines in Fig. 30A-F, compare Fig. 30G, H showing the two conditions occurring in Attaphila). The anterolateral extension of S7 sclerotisation beyond tr7, which in A. sexdentis is much shorter than in other Attaphila species (compare green lines in Fig. 30G and H), also varies strongly in other blaberoids (green lines in Fig. 30A-F) and is often unclear in addition due to gradual fading (indicated by dashed parts of green lines in Fig. 30). These and other shape characteristics of the female S7 are generally difficult to compare between Attaphila and the blaberoids shown in Fig. 30 due to the aberrant course of ridge sr7 in Attaphila, with very steep lateral parts. The evidence from S7 of A. sexdentis on the grouping of Attaphila species thus remains unclear. The observed association of A. sexdentis with a species of Atta supports the assignment to the fungicola-group, and its host ant Atta sexdens (Table 2) is, in addition, more closely related to those of A. paucisetosa (Atta colombica and Atta cephalotes) than the latter ants with the host ant of A. fungicola (Atta texana) (Fig. 27;Cristiano et al. 2020: fig. 2).
In conclusion, (i) A. flava, A. fungicola, and A. paucisetosa likely form a clade (supported by four potential apomorphies in males), to which A. sinuosocarinata and A. multisetosa may also belong (based on similarities among the females); this is the Atta-associated (unknown or doubtful, respectively, for the two latter species; Table 2) fungicola-group. (ii) A. aptera, A. bergi, and A. schuppi, the members of the Acromyrmex-associated bergi-group, are poorly supported as a clade, while plesiomorphies support each of these species to be the sister taxon of the remaining Attaphila; this position is most strongly supported for A. aptera. (iii) There is no evidence on the position of A. sexdentis in this grouping of species, except that its association with Atta favours its assignment to the fungicola-group. This picture is very preliminary and partly contradictory. It mainly suffers from the lacking knowledge of the male sex in several species and from the limited availability and/or ambiguity of outgroup comparison with other Blaberoidea, especially Blattellidae.
It is thus too early for conclusions on a possible co-evolution between Attaphila and its host ant genera. Branstetter et al. (2017: p. 4, fig. 1) date all splits from that between Atta + Acromyrmex + Amoimyrmex (Acromyrmex striatus therein) and its Trachymyrmex sister clade down to that between Acromyrmex and Atta to a fairly short time span of ca. 20-17 Ma ago; this places the origin of leaf cutting in ants to about 20-18 Ma ago. This was then possibly also the time when, in close succession, the life habits of Attaphila originated and the early dichotomies within Attaphila have occurred together with the dichotomies in the ants. Alternatively, these events in Attaphila evolution could have occurred later if one or several host shifts from one ant genus to the other are involved despite the apparent present-day stability in host choice. Due to the above finding of Acromyrmex-associated Attaphila possibly being paraphyletic and Atta-associated Attaphila more likely being monophyletic, a host shift from Acromyrmex to Atta is more likely than one in the opposite direction.

Antennae
The antennae of Attaphila show several special characteristics not known from any other Blattodea (see 3.2.): (1) their shortness, scarcely reaching half of the length of the body (also typical for termites), in combination with a low number of flagellomeres not surpassing 11; (2) their insertion at the bottom of a rather deep funnel-shaped pit; (3) the dorsal membranous excavation at the apical end of the scapus, which allows a rectangular bend between scapus and pedicellus; (4) the unusual size relations of the flagellomeres along the longitudinal axis.
The biological significance of the deepening of the antennal insertion is not clear. The shortness of the antennae might be seen as an adaptation to living in the narrow chambers and galleries of the ant nest, possibly in connection with another selective pressure: to approximate the shape of the antennae to that of the host ant (with 10 flagellomeres), to which the development of the sharp bend between scapus and pedicellus may also contribute (bend in the ant also between scapus and pedicellus, but because of a longer scapus further distally). Though chemical signals are certainly of greater importance than visual and tactile ones in the communication between ant guest and host, the latter may also play a role. The strong dorsal bending between pedicellus and scapus may, in addition, provide some replacement for the dorsal bending of the antenna at its origin from the head capsule, which in Attaphila is likely limited by its deepened insertion.
The peculiarities of Attaphila in the shape of the flagellum will be pointed out by a comparison with related genera, to be expected among the numerous genera united in Blattellidae (see 7.4.). Accordingly, the antennae of adult representatives of several genera were studied (Blattella, Ischnoptera, Loboptera, Parcoblatta, Pseudomops, Symploce, Xestoblatta; and Ectobius from Ectobiidae; see 2.5. for details on taxa), of which some examples are shown in Fig. 2J-M. They all agree in the longitudinal pattern of the flagellomeres showing two antidromic gradients: (A) The relative length (length/width) of the flagellomeres, beginning with the second (the first flagellomere, the meriston, has a variable length; in most cases it is longer than the one following), steadily increases towards the tip; at the base of the flagellum they are much wider than long, at about 1/3 or 1/4 of flagellum length as long as wide, and towards the tip much longer than wide. (B) The diameter of the flagellomeres steadily decreases towards the antenna tip. In the flagellum of Attaphila gradient A is well visible, even more conspicuous than in the other genera, since it is with a comparable amplitude distributed over a much lower number of flagellomeres. But gradient B is very weakly expressed; the flagellum has about the same diameter along the entire length, the most distal flagellomeres are only slightly narrower and, therefore, unusually long and wide.
To get an idea of the biological basis of the deviating structure in Attaphila, the growth processes during larval life have to be considered that mainly determine the imaginal structure of the antenna. The postembryonic development of the antenna of Blattella was thoroughly analysed by Campbell and Priestley (1970; (Qadri 1938) and termites (Fuller 1920) the divisions are restricted to the meriston.
The antennal flagellum of the first larval stage of Attaphila, as deduced from the assumed second larval stage depicted in Fig. 2A, should -in contrast to Blattella (see above) -not have more than 8 flagellomeres having about the same diameter throughout the flagellum. A similarly structured flagellum is also found in first stage larvae of Eucorydia (Fujita and Machida 2014: fig. 6b), likewise consisting of rather few (11) flagellomeres. But while the number of flagellomeres in Eucorydia during larval life increases to up to 40 by divisions of meriston and meristonal annuli, the number in Attaphila does not exceed 11. The reason for this is the obviously low rate of proliferation of new flagellomeres, which seems to be restricted to the meriston producing at one time only one or two flagellomeres (and leaving a new meriston basally); divisions of more distal flagellomeres were not observed. The small size of the meriston after a division (Fig. 2B, C) suggests that a new division could only occur during the intermoult period after the next moult, what is also supported by the observation that one third of the larvae studied do not show any signs of a division. Thus, the number of new flagellomeres generated during larval life is very restricted and possibly counterbalanced by the loss of distal flagellomeres as observed in other Blattodea (Blattella: Campbell and Priestley 1970;Leucophaea: Schafer 1973;Periplaneta: Schafer and Sanchez 1973).
The characteristic shape of the flagellum in early larval stages of Attaphila, with all flagellomeres having about the same diameter, is maintained up to the imago, resulting -in connection with increasing flagellomere length towards the apex -in unusually large distal flagellomeres. The small size of the distal flagellomeres in other Blattodea is presumably caused by a switch in the growth processes of the flagellomeres leaving the proximal division zone; they further on elongate to some extent, possibly at the expense of the diameter, till they finally stop their growth. Meanwhile, at the flagellum base the next generation of flagellomeres with a larger diameter is generated, and so on. The presence of the aberrant feature already at a very early larval stage in Attaphila cannot be the only reason for its presence also in later stages, since in Eucorydia, having a similar flagellum as Attaphila in the early larval stages (see above), the flagellomeres of the imaginal antenna are distinctly decreasing in diameter towards the apex. It seems that the flagellomeres in Attaphila have lost the ability to stop growth in diameter, or that this ability is not activated in the distal flagellomeres. The aberrant shape of the flagellum can be seen as a consequence of its shortness. A short antenna cannot have the same proportions as a long one, the few flagellomeres have to be enlarged and strengthened to get the necessary stability and enough surface for sensory organs. In other insects with relatively short but overall unmodified antennae (termites, Hymenoptera, Coleoptera) the flagellum, similarly as in Attaphila, is not or only very weakly narrowed towards the apex. Wheeler (1900) suggested that the low and variable number of flagellomeres and the terminal incompleteness of the flagellum are due to mutilation by the host ants rather than to the genetic disposition of the cockroaches. A weak point in Wheeler's argumentation, however, is his own observation that flagellomere number, though varying among specimens, is in most cases the same on the two sides of a specimen. This can hardly be explained by mutilation, as Wheeler himself admits. Our own studies do not support Wheeler's idea of a substantial influence of the host ants on antennal length of Attaphila and suggest that, if mutilation by the host ant occurs, it should only concern few distal flagellomeres. Loss of distal flagellomeres seems to be a quite common event during the larval development of Blattodea (Campbell and Priestley 1970;Schafer 1973;Schafer and Sanchez 1973) and may have different causes: Programmed degeneration followed by passive detachment or pruning by the cockroach itself, difficulties during moulting, and mutilation by a foreign species, by conspecific specimens or by the bearer itself. There are sporadic reports in the literature of cockroach larvae eating their own apical flagellomeres (Campbell and Ross 1979 for Blattella;Nalepa 1990 for Cryptocercus). Many termites show a behaviour of antennal cropping (Nalepa et al. 2011); rare direct observations suggest this to result from terminal antennomeres being bitten off by the animal bearing them or by its mate (Heath 1903). A further clarification of this issue in Attaphila was not possible with the material at hand, since the occurrence of an artificial loss of flagellomeres during handling could not be excluded. For a final solution a directed analysis, including possibly also the attempt to breed Attaphila without their hosts, would be necessary to clarify how the antenna looks in a freshly hatched larva and how it develops further on.

Legs
The legs of Attaphila (Fig. 4) are rather strong and stout and certainly not appropriate for fast running, especially since the tightly joined tarsomeres would scarcely allow expansive movements. The high femora, especially of hind-and midlegs, are, on the one hand, reminiscent of legs of certain jumping insects (e.g. psyllids), where the thickening of the femur is due to enlarged tibia extensors. On the other hand, they also resemble the thickened femora of Embioptera; these harbour enlarged tibia depressors (Davis 1936;Ross 2000: p. 24, fig. 21), which according to Ross (2000) facilitate backward movements in narrow galleries. While Attaphila cockroaches may hardly need the ability to jump (and were never reported to do so), they may well benefit from a strong depression of the tibiae: (1) Improved backward movement into a crevice may be advantageous to them. (2) Strong tibia depression may also support the clinging of Attaphila females to ant queens when these start their nuptial flight, or to some fixed object when aggressive ants try to remove them. (3) It may also maximise a tight and firm adduction of the tibia to the femur (and of the entire legs to the body); when all legs are flexed in this way, possible attacks of ants or other insects may be overcome without severe wounding since the mandibles of the aggressor cannot find working points. The efficiency of this posture could be further increased by the especially deep ventral femoral groove, into which the tibia can tightly fit (as also noted by Brossut 1976), and by the anteroposteriorly compressed shape of the legs, which likely allows their close clinging to the ventral body surface. Whether the species of Attaphila re-ally show the behaviours associated with points (1)-(3) remains to be examined. In contrast to the above point (2), Brossut (1976) suggests that the fixation to the ant queen is mainly supported by the adhesive forces of the well-developed pretarsal arolia.
The tight closing up of femur and tibia can only work when there are no spines along that part of the ventral side of the tibia, which during flexion becomes positioned in the femoral groove. In other Blattodea, the ventral side of the tibia is usually provided with several spines, at least in the mid-and hindleg. Attaphila exhibits only one ventral spine on the mid-and hindtibiae, which is situated far distally (Fig. 4B, C); the foretibia has no ventral spine (Fig. 4D). There is an interesting parallel in the jumping cockroach Saltoblattella montistabularis Bohn et al., 2010, which also has ventral femoral grooves, but only on the hindleg, the saltatory leg (Bohn et al. 2010). In this case, the narrow closing up of femur and tibia takes place immediately prior to the jumping movement and serves to get a maximal stretching of the leg. As in Attaphila, the corresponding tibia has only one ventral spine far distally.
In contrast to that, the dorsal and apical spines of the tibiae are well developed in Attaphila. They may, as in other cockroaches, serve for a strong forward pushing of the cockroach using the coarseness of the surrounding substrate (into which the spine tips can grip); based on the same mechanism, these spines would also make it difficult to drag the cockroach out of a crevice backwardly. The mechanism of these spines, however, is in conflict with a good ability of moving backward within crevices, which, therefore, is unlikely to be the reason for the thickened femora (see point (1) above).

Male tergite specialisations
Glandular pores are ubiquitous structures on the tergites of male Blattodea, sometimes occurring in rather large size and such a density that the cuticle appears perforated like a sieve (Bohn 1993). The glandular pores occurring in Attaphila species are usually very small and sparsely distributed in the preridge areas of T1-5 (e.g. Fig. 5E-I, posteriorly of msl2). Only in A. aptera these areas are very densely covered with pores (Fig. 5A, B). Slightly larger glandular pores are only present in the species with specialisations on T2 (msl2), namely within and around the specialisations (Fig. 5E, F).
Tergal specialisations (i.e. differentiations beyond the glandular pores) are found in nearly every family of Blattodea, especially frequently in the blaberoid families apart from Blaberidae. They often consist of groups of specifically arranged bristles serving as retainers for glandular secretions produced elsewhere in their neighbourhood, not seldom combined with variously deep and extended pits or troughs for the storage of the secretions. The specialisations can occur on any of the abdominal tergites from T1 to T10, often on several of them (Roth 1969).
The specialisation on T1 of A. aptera (Fig. 5A, B,  msp1) represents a relatively simple form of this type of a specialisation bearing bristles. It only consists of a pair of sparse tufts of bristles within a field of weaker sclerotisa-tion situated in the middle of T1, immediately posteriorly of the ridge tr1. The question is where the secretions are produced which should be retained by the bristles. Possible sources are the field with weaker sclerotisation, or the glandular pores present in high numbers and density in the anteriorly adjacent area up to the anterior border of T1. Most likely, the bristles additionally (or alternatively) serve as sensory organs when the female, after mounting the male, feeds or palpates the dorsum of the male. Specialisations on T1 are widely distributed among Blattodea: they are frequently found in Blattidae, but also occur in Blattellidae, e.g. in some species of Xestoblatta. The specialisations of Blattidae are similarly simple as in A. apte ra, but they are basically located around the level of tr1, and the number of bristles is usually much higher (Roth 1969). In Xestoblatta the specialisations of T1 are rather variable in size and composition, and essentially placed posterior to tr1 (illustrations in Silva-da-Silva and Lopes 2015). Some species have a huge transversal deepening extending over the full width of the tergite (Silva-da-Silva and Lopes 2015: figs 4, 15); in others the specialisation is much smaller and restricted to the middle of the tergite; it can, as in Attaphila aptera, only consist of a more or less extended assemblage of bristles (Gurney 1939), or the bristles are combined with a pair of small pitlike deepenings (Gurney 1939: fig. 42;Grandcolas 1992).
The specialisation on T1 of A. bergi (Fig. 5C, D, msa1) is very different from the aforementioned specialisations; it has no bristles and only consists of a pair of areas with emphasised microreticulation and associated glandular pores on the anterior part of T1 (Fig. 5C, D). A similar structure has not yet been reported from another cockroach -maybe because it is inconspicuous and easily overlooked, more likely, however, because it does not occur in the larger Blattodea since such constructions, developed for a very small animal, might not be able to function satisfyingly in much larger animals.
The specialisations of the fungicola-group consist of a trough situated laterally at the anterior border of T2 ( Fig. 5E-I, msl2); bristle structures are not involved. The troughs presumably are reservoirs of glandular secretions released through relatively large pores lining the wall of the trough; in Fig. 5E some isolated pores (of glands? pg) can be seen outside the trough. Most surprisingly, a very similar structure at the same position (laterally, near the anterior border of T2) is also found in species of the subgenus Pauciscleroblatta of the genus Dziriblatta (Ectobiidae; Bohn 2019, see therein for taxonomic status, which differs from Beccaloni 2014). In all species of this subgenus (Bohn 2020: e.g. fig. 2A, H) the corresponding area is densely covered with very large glandular pores; in two of the altogether six species part of the porous area is deepened to a similar trough as in the species of the fungicola-group, from which it, however, differs by the absence of crossing ridges. So far, comparable structures have not been found in any other species of Blattodea. The isolated occurrence of the T2 trough in only some members each of the likely only distantly related blaberoid genera Attaphila and Dziriblatta argue against homology of the troughs in these taxa.

Male tergite 9
The narrow anteromesally directed arm of male tergite T9 (pt9 in Figs 9D, 24A, 25A-D, 29A, B, C, G, H) is a structure not yet known from male dictyopterans, where usually the ventrally bent lateral parts of tergite T9 are roundedly truncate and in full length either shortly overlap the lateralmost parts of sternite S9 (e.g. Klass 1997: T9p in figs 202, 236a, 264; fold stretched in Fig. 29F) or, more rarely, bend inward above sternite S9 (Klass 1997: T9p in fig. 295a). However, the male pt9 reminds of the (para)tergal extension of the female (pt8,9 in e.g. Fig.  19A, 29E), which is present in all Dictyoptera. The female pt8,9 is predominantly formed by tergite T9 (along the antecosta of segment 9, ac9), but at least to its proximal portion tergite T8 also contributes -less distinctly in most Blattodea than in Mantodea ( Fig. 29E; te in Klass 1998: figs 2-4, 11-18; TG8+9ε in Brannoch et al. 2017: fig. 14C). The arm pt9 of the male also originates from the anterior part of T9 (Figs 25A, 29G, H), but a contribution of T8 is not evident. The arms of female dictyopterans serve for the abutment of the entire ovipositor; their ventral ends are in contact with several 8 th -segmental sclerites, and with the 9 th -segmental gonangulum (gg = laterocoxa LC9; Klass 1998: figs 11-18). In the males the 9 th -segmental ventral sclerites (laterocoxal and coxal ones of both sides) are all combined in the subgenital plate S9 (compare blue sclerites in Fig. 29E-H), and it is possible (though difficult to demonstrate) that the male tergal arm pt9 contacts the laterocoxal portion of S9. The tergal arm of male Attaphila is thus possibly a feature that has been taken over from the morphology of the female. Similarly, the shortness of tergites T8 and T9 to the extent seen in male Attaphila, and their overfolding by tergite T7, is also unusual among male Dictyoptera but normal in females.
The function of the rigid tergal arms of the male might be as follows: When the subgenital plate is pushed backward (by muscles connecting the anterior ends of apodemes sta9 of S9 with sternite S8), the arms pt9 may act as a lever lifting tergite T9 and the terminal part of the abdomen posterior to it a bit upward. Such a movement would plausibly open the space above the subgenital plate, where the phallomeres are located, to the back, e.g. during mating. A tighter at-rest closure of this genitalic space compared to many other Dictyoptera might be an-other element of preventing the host ants' mandibles from gripping a body part of the cockroach, in this case the subgenital lobe (see 7.3.2. for legs).
A male tergal arm pt9 has so far not been reported for a dictyopteran; the same is true for very short male T8 and T9 covered by T7 -with the exception of Cryptocercidae, which have a huge T7 expanded to the posterior tip of the abdomen. However, we found a similar situation in Lobopterella dimidiatipes (Bolívar, 1890), a member of Blattellidae (Djernaes et al. 2020: table 4 based on results of Wang et al. 2017, Bourguignon et al. 2018, and Evangelista et al. 2019Evangelista et al. 2021). In this species the ventrally bent part of T9 (T9p) overlaps S9 ventrally as in most Dictyoptera (Fig. 29D, ventromesal border of T9p indicated by orange arrows). The anterior marginal part of T9p is evidently much stronger and thicker (ac9) than further posterior parts of T9p, thus corresponding with arm pt9 of Attaphila; and the pt9 of Lobopterella approaches the lateral border of S9 as in Attaphila (A1 in Fig. 29C, D) -though perhaps less tightly, as indicated by the fairly wide membrane separating pt9 and S9 on the left side of Fig. 29D. T9 morphology in Lobopterella could thus be plausibly interpreted as an early evolutionary stage of T9 morphology in Attaphila. It shows how an arm like pt9 of Attaphila likely has originated, and that it is not a sclerite element newly formed. In the Blattodea that have T9p overlapping S9 (including Lobopterella), the anteromesal corner of T9p is quite usually also close to the lateral margin of S9 (as in Fig. 29F; Klass 1997: figs 262-265). The specialities of Lobopterella and Attaphila are then the strengthening of the antecosta (ac9) along the anterior margin of T9p and the far anterior extension of T9p; a ventromesal part of T9p posterior to arm pt9 seems to be weakened in Lobopterella, and desclerotised in Attaphila, which rendered the anterior part arm-like. Lobopterella additionally shows, like Attaphila, unusually short male T8 and T9.

Female genitalia
The laterosternal shelf area is a highly variable part of the dictyopteran female genitalia (exemplified in Klass 1998: figs 5-10). This concerns the shape of the shelf, which can be simply step-like, or with the upper part of the step projecting posteriorly as a lobe or a pair of lobes; and it concerns the features of its main sclerite (ls).
The absence of a shelf (i.e. of a physical step upward) between the laterosternal shelf area (with sclerite ls) and the vestibular floor (with sclerite vs if present) could be a speciality of Attaphila. Most Dictyoptera have a shelf with an anteriorly bulged wall (as in MK64: fig. 2, see also 'se' in Klass 1998: figs 5-10). This is also true for many Blaberoidea (MK64: fig. 40B of Supella), and in Blaberidae the deepening of the wall of the shelf to the anterior leads to the formation of a brood sac (compare MK64: figs 40B and 79B). However, it is unclear from the illustrations in MK64 to what extent a shelf is present in many of the remaining Blaberoidea she studied, so this character is difficult to judge.
In many Blaberoidea sclerite ls is continuous across the midline (e.g. Fig. 31A, B); and a strongly convex posterior margin of the middle part occurs in many Ectobiidae (Dziriblatta in Fig. 31B; Ectobius, Capraiellus, Planuncus in Bohn et al. 2013: fig. 4I-M). However, the middle part (ls-c and ls-a) being shaped as a U open to the anterior (Fig. 22) seems to be known only from Attaphila. We also note that in many Blaberoidea the identification of ls versus vs sclerotisations is not entirely clear -including those in Fig. 31 (as expressed by "?" in the labelling).
The tubes lst (Figs 22, 23) associated with sclerite ls are striking structures of Attaphila. Yet, some Bla beroidea show potentially homologous structures (character not clear in many illustrations in the literature including MK64): In Saltoblattella, likely a member of Pseudophyllodromiidae (Evangelista et al. 2021), the same parts of the ls sclerite are anteriorly expanded, the expansions plausibly being part of the walls of a pair of pouches (Bohn et al. 2010: fig. 5I); however, details of these structures are not known, and they do not appear to be rolled up as in Attaphila (cross sections in Fig. 23D). The only evidence of similarly placed (but simpler) pouches in MK64 concerns the pseudophyllodromiids Neoblattella and Lophoblatta (MK64: figs 47 [lowermost structures apart from spermathecae], 59 [thin extensions immediately laterad of spermathecae]). The biological significance of the tubes lst remains obscure. They might serve for muscle attachment (for bundles 'B' and 'Bd' in Klass 1998: fig. 20 resp. 21), though this does not seem to be the case at least for the elements of Lophoblatta (MK64: figs 58, 59), and the rolled-up condition of lst in Attaphila would be untypical for such a function. The lst of Attaphila have a position similar to the spermathecae in other Blaberoidea, and in Attaphila we could not find any other structures more clearly representing spermathecae; yet, due to their shape and extensive sclerotisation it is unlikely that tubes lst of Attaphila represent the typical blaberoid pair of spermathecae.
One more speciality of Attaphila is the wide, sparsely folded opening of the common oviduct (oc in Fig.  23A-C), which is in contrast to the narrow but strongly folded (for expansion during egg-laying) opening of the common oviduct upon a genital papilla or plateau in most Dictyoptera (as in Klass 1998: 'go' in figs 20, 21;MK64: g.p. in figs 52, 73A).
Furthermore, the right-sided pouch gcp upon the genital chamber (Figs 19A, B, D, 21A-C, 23A) might be special for Attaphila; at least, we are not aware of such a distinct pouch having been reported previously for a blaberoid. Pouch gcp creates one of the rare regular asymmetries found in the female genitalia of Dictyoptera. We note that if arranged symmetrically over the entire width of the genital chamber, such a membranous pouch would be much less conspicuous and perhaps often overlooked. Only the distinct asymmetry of this element may thus be special to Attaphila, and this may be correlated with the distinct asymmetry of the neighbouring spermathecal plate (sp in Fig. 23A).

Cerci
The undivided cerci may also be mentioned as a speciality of Attaphila, though this feature is not surprising in view of the small size of the animals and the relative shortness of these appendages. Undivided cerci are also present in similarly small Blattodea like Atticola Bolívar, 1905(Bolívar 1905 and Myrmeblattina Chopard, 1926(Chopard 1924, under the genus name Phileciton), both also myrmecophiles but presumably not closely related with Attaphila. However, they also occur in the much larger Cryptocercidae (Deitz et al. 2003).
Blaberoidea is the second-most speciose of the seven principal lineages (after the Cryptocercidae + Isoptera lineage). According to Djernaes et al. (2020) and Evangelista et al. (2021) (and Grandcolas 1996 before), Blaberoidea is classified in five families: Pseudophyllodromiidae, Ectobiidae, Blattellidae (including Attaphila), Nyctiboridae (four of the former subfamilies of an "Ectobiidae s.l."), and Blaberidae. The monophyly of Blaberoidea with this content was first hypothesised by MK64 (text- fig. 3, as sister taxon to Anaplectinae/-idae) and has remained undisputed since. The monophyly of Blaberidae is also undoubted (papers mentioned above). For each of the four up-ranked "ectobiid s.l." families monophyly can be concluded from a conspectus of the abovementioned molecular studies (Djernaes et al. 2020: table 4) and from a phylogenomic study (Evangelista et al. 2021). However, this concerns only a small set of genera that form a monophyletic core of each family, while for the vast majority of the genera and species the taxonomic assignment to one of the four "ectobiid s.l." families has remained unsupported from a phylogenetic perspective (see Klass 2001 for apparent support presented in Grandcolas 1996). The relationships among the five blaberoid families have been highly controversial (situation summarised in Djernaes et al. 2020); the probably most robust hypothesis (Evangelista et al. 2021) is Ectobiidae + (Pseudophyllodromiidae + (Blaberidae + (Blattellidae + Nyctoboridae))).
Attaphila was rarely considered explicitly in cockroach classification due to the limited knowledge of this genus. Djernaes et al. (2020; focused on Blaberoidea), the first molecular study including Attaphila, found it to be deeply subordinate in Blattellidae. Considering the taxa included in Djernaes et al. (2020), they found a blattellid subclade Ischnoptera + (Pseudomops + (Xestoblatta sp. + Attaphila)) with moderate support values (Xestoblatta being non-monophyletic in that study, and even grossly so according to work of A. Vélez-Bravo, pers. comm.). Like Attaphila, the other three genera are Neotropical plus southern Nearctic (with few exceptions; Beccaloni 2014), but their members are normally sized, usually fully winged, and live in leaf litter; and no myrmecophilous habits are known from them. Not much reminds of the minute, brachypterous, and myrmecophilous Attaphila.
To what extent do morphological features confirm or contradict this placement of Attaphila in Blaberoidea, in Blattellidae (sensu Djernaes et al. 2020), and in a blattellid subclade together with Pseudomops and some Xestoblatta, and perhaps Ischnoptera? (This would correspond with an assignment to Pseudomopini as defined in Evangelista et al. 2021: fig. 2.) The male genitalia are the most instructive morphological character system with regard to phylogenetic relationships in Blattodea (under exclusion of the Isoptera, whose male genitalia are strongly reduced: Klass 2000; Klass et al. 2000). They were a major character system in MK64's breakthrough reclassification of Blattodea; and all the principal lineages of Blattodea that were hypothesised by Klass (1997) and Klass and Meier (2006) based mainly on phallomere morphology were later confirmed by molecular studies (yet, the proposed relationships among the principal lineages and the hypothesised lineage Anaplectidae + Blaberoidea = Blaberoidea s.l. did not stand molecular analyses: Djernaes et al. 2015;Wang et al. 2017;Bourguignon et al. 2018;Evangelista et al. 2019Evangelista et al. , 2021Djernaes et al. 2020). Accordingly, if Atta phila belonged to Blaberoidea, this should be evident from the male genital characters. However, a closer association of Attaphila to a particular blaberoid family or group of genera is not expected based on such characters, mainly because the comparative morphology of male genitalia in Blaberoidea has remained grossly understudied, but also because homoplasies occur (e.g. morphology of posterior part of L2 sclerite, with or without articulation A10, in Klass 1997: fig. 328). There are no sound morphological arguments in favour of the monophyly of any of the blaberoid families, except for Blaberidae (see Klass 2001 for arguments proposed in Grandcolas 1996; characters listed in Evangelista et al. 2021: supplement pp. 8-11 require a more coherent and taxonomically broader testing). Female genitalia were also essential for MK64's classification and are another character system with a great phylogenetic potential, but the degree of study is even lower than for the male genitalia.
The assignment of Attaphila to Blaberoidea is suggested by several features of the male genitalia that can be considered autapomorphies of Blaberoidea, but there are problems in the details. In the following, character state numbers are from Klass and Meier (2006: fig. 4 and Appendix), and evolutionary character evaluation is based on the character state distribution over taxa and the phylogenetic relationships found therein. The relationships are: Anaplecta = A + (Nahublattella = N + (Supella = S + remaining Blaberoidea including Euphyllodromia = RB)); Nahublattella, Supella, and Euphyllodromia are the sampled representatives classified as Pseudophyllodromiinae/-idae. For phallomere elements see Supplement 4 Fig. S3 and compare illustrations in Klass (1997: figs 200-319, 324 and 328 [L2], 330 [R1, R2]).
In Attaphila we observed the following relevant states of characters: (45-1) A + N + S + RB: On left phallomere, the distinctly rod-like condition of the endophallic apodeme (ea = lve). (52-2) A + N + S + RB: On left phallomere, the location of the base of the hook (h = hla) at the posterior edge of the left phallomere. (53-2) A + N + S + RB: On left phallomere, the long membranous basal part of the hook (h = hla), which allows its complete retraction. (54-1) S + RB: On left phallomere, the presence of a distinct groove (hge) along the basad-directed surface of the claw part of the hook. (55-1) S + RB: On left phallomere, the presence of a distinct notch or cleft (hcl, '45') in one wall of the groove hge. (34-1) RB: On right phallomere, sclerite region R1t fused to sclerite R2 in the former articulation A6 (R1t in this configuration often isolated from other R1 sclerotisations, forming sclerite R1S, the compound sclerite then being R1S+R2 = cleft sclerite cs). (37-1) RB: On right phallomere, sclerite R3 longer than wide, side margins at least slightly concave, and anterior tip a bit widened. On the other hand: (8-1) N + S + RB: On left phallomere, the presence of a division between the L2 sclerotisation on process paa and the remaining L2 sclerotisations (articulation A10) is likely not true for Attaphila (and many other Blaberoidea, likely due to secondary loss).
The apomorphies 45-1, 52-2, and 53-2 agree with a placement of Attaphila in Blaberoidea. However, they also occur in Anaplectidae, which in light of recent molecular analyses (Anaplectidae phylogenetically remote from Blaberoidea) leads to the assumption that homoplasy has occurred regarding these apomorphies, which are then not very convincing. Apomorphies 54-1, 55-1, 34-1, and 37-1 support the assignment of Attaphila to blaberoid subclades that include Euphyllodromia but exclude Nahublattella or both Nahublattella and Supella. It is unclear, however, whether the four latter features can be used for arguing subgroups within Blaberoidea (and the assignment of Attaphila to them), since according to the conspectus of recent molecular analyses in Djernaes et al. (2020) and to the results of Evangelista et al. (2021) and A. Vélez-Bravo (pers. comm.) Euphyllodromia, Su-pella, and Nahublattella are all deeply subordinate in the Pseudophyllodromiidae clade. This requires either homoplasy or reversals in these four apomorphies. While male genital morphology thus altogether supports the assignment of Attaphila to Blaberoidea -though with numerous ambiguities -Attaphila does not show any genital character that is in conflict with this assignment, and its male genitalia are overall typically blaberoid. We additionally note that the very long sclerite R3 of the right phallomere ( Fig. 24G; a shape characteristic of R3 going beyond that specified in apomorphy 37-1 above) is suggestive of a position of Attaphila in Blattellidae; such a condition is typical for members of this family (e.g. Fig. 33), but is not found in the other blaberoid families.
The presence of a hook on the right paraproct (hmp in Figs 5J, 6B) in Attaphila aptera (though not in the other Attaphila species with males known; see 7.2.) may point to an assignment of Attaphila to Blaberoidea excluding all Pseudophyllodromiidae. From Pseudophyllodromiidae such hooks are unknown (including Euphyllodromia), while they are widespread in the remaining families of Blaberoidea (see e.g. Bohn 2004Bohn : fig. 11, 2019 for Ectobiidae, considering mirrored morphology of male postabdomen), also in presumably all species of Ischnoptera, Pseudomops and Xestoblatta. Yet, the absence of the hmp hook in e.g. part of Attaphila leaves the possibility of its lack in Pseudophyllodromiidae also being secondary (which appears quite likely in view of the relationships among blaberoid families in Evangelista et al. 2021, see above).

Possible relationships of Attaphila to other genera of Blaberoidea
According to Djernaes et al.'s (2020) finding of a clade Ischnoptera + (Pseudomops + (Xestoblatta sp. + Attaphila)), we focused our attention on these three blattellid genera; close relationships of these were also hypothesised in Grandcolas (1992)  for potentially apomorphic features that members of these genera share with Attaphila. However, we did not find any striking features of this category. In none of the said blattellid genera the antennae and legs show any indication of the special features seen in Attaphila (Figs 2,  4). Specialisations on male tergite T1 occur in some Xestoblatta (see 7.3.3. ;Hebard 1916;Gurney 1939: fig. 13; Silva-da-Silva and Lopes 2015: figs 4, 15; Grandcolas 1992), but also in many other Blaberoidea (Roth 1969), and they are absent in the majority of the Xestoblatta species and in all species of Ischnoptera and Pseudomops.
On the contrary, some male genital features found in Xestoblatta, Pseudomops, and Ischnoptera are not well in accord with a close relationship to Attaphila. The area around the posterior portion of sclerite L2 is among the parts of the male genitalia that show the richest variation within Blaberoidea (see Klass 1997: fig. 328 for main points of variation). L2 extends over most parts of the walls of the endophallic apodeme (ea = lve), but usually its posterior portion additionally extends beyond the apodeme walls; then this exposed part of L2 is either (1) forked distally and each branch is associated with a process (virga vi = via and process psa; each of them can be branched further; fig. 328b); or it is (2) unforked and only one process is present (via; fig. 328c-e, h-k). Alternatively, (3) L2 can be limited to the walls of the apodeme and there is no process following posteriorly (fig. 328f, g). Further distinctions concern the presence of the phallomere gland, which opens in this area; the presence of a tendon tve (bearing one attachment of muscle l10 to apodeme lve); the way how the ejaculatory duct joins the area; the presence of an articulation (A10) separating the sclerotisation on the virga via from the rest of L2 (division into L2D and L2E); and the presence of muscle l10 moving the virga via relative to apodeme lve, which according to the sparse current knowledge is correlated with the presence of articulation A10. In cases where only one process is present ((2) above), the positioning of articulation A10, of the phallomere gland, of tendon tve, and of the attachment of muscle l10 usually allow the identification of the process as via or psa (likely via in all sufficiently studied cases). The full set of the mentioned elements is likely plesiomorphic for Blaberoidea (via, psa, tve, A10, l10, phallomere gland), but there are clearly many homoplasious losses of some or all of them (e.g. lack of A10, l10, and psa in the pseudophyllodromiid Euphyllodromia and the blaberid Blaberus, fig. 328d, k). In the Xestoblatta, Pseudomops, and Ischnoptera species with male genitalia sufficiently known, either the posteri-or portion of L2 is unforked and only one process is present ((2) above, Fig. 32A, B, D), or L2 is limited to the lve apodeme and there is no process ((3) above, Fig. 32C). Finding Attaphila with its putatively plesiomorphic features of a forked L2 and two associated processes (vi and psa in Fig. 32F-H) subordinate in this group of blattellid genera leads into conflict. In the construction of this part of the genitalia Attaphila shows more similarity with e.g. Saltoblattella montistabularis (possibly Ectobiidae, see Djernaes et al. 2020, but more likely Pseudophyllodromiidae, see Evangelista et al. 2021;Bohn et al. 2010: figs 5B, 6: process 'lo' plus sclerotised bulge upward to it) and Lobopterella dimidiatipes (Blattellidae, tribe Hemithyrsocerini according to Evangelista et al. 2021;Fig. 32E). Furthermore, at least some Attaphila species have one or two grooves along the virga (vge1, vge2 in Fig. 32F-I, with structural details not being entirely clear), which is not known from Xestoblatta, Pseudomops, and Ischnoptera species and most other Blaberoidea. However, the presence of one such groove is known from Parcoblatta lata (Klass 1997: figs 272-275; belonging to Blattellidae, tribe Parcoblattini according to Evangelista et al. 2021) and is a potential synapomorphy suggesting a closer relationship between Attaphila and this genus. On the other hand, Parcoblatta lacks a psa process. The evidence from this character system is thus quite conflictual.
The second part of the male genitalia that is highly variable within Blaberoidea is the posterior part of the right phallomere. The distinctions mainly concern various subdivisions and fusions of the R1 sclerotisations and their relations to R2 (such as the fusion leading to a cleft sclerite cs, see apomorphy 34-1 above), the pattern of teeth and ridges on these sclerites, and the presence of additional putatively apomorphic sclerites R4 (most dorsally) and R5 (most ventromesally). Details of this part of the genitalia are poorly studied (for basics see Klass 1997: fig. 280-287, 308-319, 330n-s). In various species of Ischnoptera, Pseudomops, and Xestoblatta we found a large ventromesal sclerite, which likely represents R5 ('Ri' in Grandcolas 1992), and which in some (but not all) species forms a spined process (Fig. 33A-C). The lack of such a sclerite in Attaphila requires the assumption of its secondary loss. However, as sclerite R5 is present in some but not all taxa of both Blaberidae (absent in e.g. Nauphoeta) and Blattellidae (absent in e.g. Parcoblatta) (Klass and Meier 2006: char. 39), while both families appear monophyletic in molecular analyses (including (CR 13, ex cult.). B: Pseudomops sp. (Mexico, Bo 1454). C: Xestoblatta cantralli (CR 15/1). D: Xestoblatta hamata (CR 9/1). E: Lobopterella dimidiatipes (ex cult.). F-I: Attaphila aptera, photograph (F, taken from Fig. 24A) and tentative reconstruction drawings (G complete; H with dorsal parts cut off; I: proximal part of virga cut out); all included sclerotisations belong to main sclerite L2; identification of element tve tentative; F-H at same scale, I 1.4× -Abbreviations: A10? possible articulation at base of virga (presence unlikely); ea endophallic apodeme; psa process; tve virga tendon; vge1, vge2 virga grooves; vi virga; vla ventral lobe of left phallomere (= "ventral phallomere"). -Explanations for G-I: Thick black lines are (virtual) cutting lines through the cuticle. Continuous thin black lines are freely visible edges (= lines along which the cuticle bends away from the observer's view). Dashed thin black lines are edges hidden beneath other cuticle (only some shown). Membranous cuticle in very light grey, sclerotised cuticle in darker grey; cuticle shaded darker where it dives beneath other cuticle. the genera here considered, see Djernaes et al. 2020 andEvangelista et al. 2021), a secondary loss of R5 has most likely occurred several times, which is then also plausible for Attaphila. In Lobopterella sclerite R5 is possibly present, but fused with the cleft sclerite (Fig. 33D). A sclerite R4 is probably absent in Attaphila as well as Ischnoptera, Pseudomops, Xestoblatta, and Lobopterella (Fig. 33).
The unusual shortness of male tergites T8 and T9 and the special condition of the ventrally bent lateral parts of T9 -with a strengthened anterior antecostal rim (forming pt9) extending far to the anterior and a poorly sclerotised posterior part (see 7.3.4.) -are noteworthy apomorphies shared between Attaphila and Lobopterella dimidiatipes; both appear to reflect conditions of dictyopteran females. There are no molecular analyses including both Lobopterella and Attaphila. In analyses including Lobopterella it falls in Blattellidae; within this taxon it is variously far remote from the included members of the Xestoblatta + Pseudomops + Ischnoptera group: placed in the sister taxon of this group (Evangelista et al. 2021: see sister tribes Pseudomopini and Hemithyrsocerini), in a different inclusive main branch , or sister to remaining Blattellidae in Bourguignon et al. (2018). This data does not allow to estimate possible Lobopterella-Attaphila relationships and the extent of associated phylogenetic conflict.
In the female genitalia, the subdivision of the gonangulum (or the loss of its lateral portion) could be of interest. In all Attaphila the gonangulum (gg = laterocoxa 9 LC9) is represented by the mesal part (gg-m) bearing articulations A2 and A3 (Fig. 19A). The lateral part (gg-l) having a hinge-like contact A1 with the paratergal extension pt8,9 is either also present but separated from the mesal part (plesiomorphy of A. aptera? Fig. 19A, see 7.2.) or absent (other species, Fig. 20B; as the outline of the mesal part corresponds with that in A. aptera, this could be derived from the divided condition). Many Blaberoidea from several families show a plesiomorphic undivided gonangulum comprising both parts (as in Klass 1998: figs 11-18): e.g. Neoblattella from Pseudophyllodromiidae, Parcoblatta from Blattellidae, Ectobius from Ectobiidae, and Epilampra from Blaberidae (MK64: figs 46, 64, 73, 91). A division as characterised above is reported for various Pseudophyllodromiidae (Riatia, Supella) and Blattellidae (Blattella, Symploce) (MK64: figs 48, 52, 66, 67). A (near-)absence of the lateral part seems to apply to e.g. Allacta from Pseudophyllodromiidae, Pseudomops, Loboptera, and Xestoblatta festae from Blattellidae, and Blaberus from Blaberidae (MK64: figs 56,62,68,70,87). (The gonangulum is represented by the lateral parts = ltst. IX and the mesal parts = pt.m. + c.p. in MK64's figures according to her "crosspiece" hypothesis, which has been rejected by Klass 1998.) As a conclusion, the apomorphy of a divided to laterally reduced gonangulum is found in Attaphila and at least the studied species of Pseudomops and Xestoblatta, but this feature shows a high degree of homoplasy and is thus not convincing.
The laterosternal-shelf sclerotisations (ls) are highly variable across Dictyoptera, including the presence or absence of a division along the midline (Klass 1998: fig. 5-10). Although the medially undivided condition appears to be plesiomorphic for insects (undivided sclerotisation of the genital lobe = languette in zygentomans : Rousset 1973), the polarity within Dictyoptera is ambiguous. Pseudomops (MK64: figs 61, 62) has, like Attaphila (Figs 22,  23A), a medially continuous sclerite ls that also has wing parts (w) extending far posterolaterally. While this seems to be exceptional for Blaberoidea according to the illustrations in MK64, it also occurs in members of several families, e.g. Riatia (MK64: fig. 48), Dziriblatta, and Loboptera (Fig. 31A, B; independently of the problems in the distinction between ls and vestibular sclerite vs), and can thus hardly support a close relationship between Attaphila and Pseudomops. We note that in Riatia, Pseudomops, and Loboptera unambiguous vestibular sclerites are additionally present posterior to the middle part of sclerite ls (MK64: vst.s. in figs 48, 62; vs in Fig. 31A); this may be seen as support for our interpretation of the entire sclerite ls in Fig.  23 of Attaphila as laterosternal-shelf sclerite, a vestibular sclerite being absent. Yet, the identification of sclerites as ls versus vs (each of which might be subdivided) is partly ambiguous (also in Fig. 31, expressed by question marks), which puts some doubt on arguments based thereon.
The elements in the dorsal and anterior walls of the genital chamber may in the future also provide indications on the relationships of Attaphila, but this requires extensive comparative studies (see Supplement 5). The posteriorly folded orientation of the spermathecal plate of Attaphila, combined with the presence of a fold dividing the genital chamber (sp and gcf in Fig. 23), could be a character of interest; yet, this is apparently also found in the Pseudophyllodromiidae Supella (MK64: fig. 40A, with a shallow fold at sp.pl.), Euthlastoblatta, and Allacta (MK64: figs 55, 57, with an apparently deeper fold evident from the position of sp.pl.), and in Symploce from Blattellidae (MK64: fig.  67B, also with a deep fold). Other features of Attaphila, such as the lack of separate basivalvulae and the anteromedian junction of the valvifers, also occur in a variety of other Blaberoidea from several families. Species of Xestoblatta, Pseudomops, and Ischnoptera differ from Attaphila by showing a fairly complicated structuring of the dorsal and lateral walls of the genital chamber, e.g. with basivalvulae. These parts neither provide support for a relationship between Attaphila and these blattellid genera.
Attaphila shows a distinctly trilobate shape of the hind margin of the female subgenital lobe (Figs 16, 17). While this is quite unique in Blaberoidea, a weak trilobation as viewed in slide mounts is wide-spread in the group (Fig.  30B, C), and in Pseudomops ( Fig. 30E; not in Xestoblatta cantralli, Fig. 30F) it is almost as pronounced as in Attaphila. Yet, this similarity is partly due to an artifact: the appearance of trilobation is in Pseudomops increased by the flattening of the strongly vaulted S7 for slide mount-  R1S and R1P), R2, R3 (with anterior arm a, dorsoposterior arm d, ventroposterior arm v), R4, R5 are the principal sclerotisations of the right phallomere; cs cleft sclerite, composed of the dorsally fused R1S and R2, R2-part in contact with arm v of R3 sclerite; A3 articulation between arm d of R3 and R1 (R1P). ? added if interpretation is ambiguous. * added for elements located underneath others.
ing; in situ, trilobation is hardly visible in Pseudomops, but distinct in Attaphila. The significance of this similarity is thus limited.

Conclusions on Attaphila
Molecular and morphological data agree regarding the assignment of Attaphila to Blaberoidea. The molecular-based placement of Attaphila in Blattellidae is neither significantly supported nor contradicted by the morphological data at hand; this has been expected, since except for Blaberidae no apomorphies are known to clearly support any of the blaberoid families. The close relationship of Attaphila with the blattellid genera Xestoblatta, Pseudomops, and Ischnoptera as seen in the molecular study (Djernaes et al. 2020) is not supported by morphological features, and is even contradicted by the posteriorly forked L2 sclerite of Attaphila. From the morphological perspective, the blattellid Lobopterella dimidiatipes would appear as a better candidate in view of its tergal arm pt9 (and perhaps the similar forking of L2). This species occurs across the Ethiopian and Oceanic faunal regions, not in the Neotropics, where Attaphila, Xestoblatta, Pseudomops, and Ischnoptera have their focal distribution ranges. The molecular evidence on this possibility is so far not conclusive. A clearer picture of the cladogenetic and anagenetic evolution of Attaphila and its blaberoid relatives requires a much broader sampling for molecular studies (as currently done by A. Vélez-Bravo for Neotropical taxa) combined with a detailed and taxon-rich comparative study of genital structures in Blaberoidea (especially the former "ectobiid" families).